When pressing Z - or Z+for a longer time (about 3-4S), the Z axis will go down or up all the time, and it is normal to press Z - or Z+for a shorter time.

Cyril

2022-12-30

1.2K

1

0

After cross cutting correction, the cross cutting is not aligned, and there is still offset.

Miller

2022-12-24

1.1K

1

0

Files will not be upgraded

jessie

2022-12-20

1.1K

2

0

The panel did not prompt hard limit protection when Z-axis reached the hard limit switch.

Williams

2022-12-24

1.1K

1

0

1. Controller: used to generate track points, i.e. expected output.2. Driver: It is used to convert the control signal (usually speed or torque signal) from the motion controller into a current or voltage signal of higher power and output it to the actuator.3. Actuator: such as hydraulic pump, cylinder, linear actuator or motor, used to output mo...

Narrator

2022-12-26

930

1

1

When the RDC6442S is operated, the graphics super format is automatically divided. The laser first cuts in the X direction and then does not emit light. The U axis starts to feed materials to a certain length, and then the laser cutting stops. (Automatic blocking does not work)

Jamie

2022-12-24

1.1K

1

0

1. Laser cutting machine control software: What are the laser cutting machine control systems? What is control software?The control system and software are related to the material you are cutting. They fall into two categories: metal and nonmetal. Details should be subdivided. It's better to explain what materials you want to cut and give you targ...

Hiroko

2022-12-26

1.2K

1

1

Each extruder is equipped with a transmission device, which is used to connect the transmission output shaft and the main reducer input shaft that are not in the same straight line, and ensure that the included angle and distance between the two shafts can still transmit power stably and reliably under the condition of frequent changes. What is the...

Smith

2022-12-24

1.1K

0

0

Laser cutting control system is the key functional component of laser cutting equipment. As the core of laser cutting equipment, the laser cutting control system forms a set of laser cutting solutions covering typesetting, cutting, NC and other processes by integrating key technologies such as CAD, CAM, NC, etc., to achieve good compatibility betwe...

Henry

2022-12-24

1.2K

0

1

Press Z-axis to move manually on the panel, and the cutting head does not move

jessie

2022-12-23

1.2K

1

0

When working, there is light. Press the Spot button and there is no light

Darren

2022-12-23

1.3K

1

0

What should we do if the laser keeps emitting light?

Tory

2022-12-23

1.1K

1

1

USB is not connected (with COM port)

Darren

2022-12-20

1.1K

2

0

Setting the cutting point is invalid.

Marshall

2022-12-20

939

1

0

The lifting is not good.

Keegan

2022-12-19

1.1K

1

0