chanelink logo
CHANELINK
Português

The tesat optical terminal selected by Lockheed Martin satellite has passed ground testing

837
2023-10-27 16:52:28
Ver tradução

Tesat Spacecom's laser communication terminal announced on October 26th that the company has passed critical ground testing deployed on NASA satellites.

Tesat's SCOTT80 optical terminal was selected by Lockheed Martin, one of several manufacturers producing satellites for the Space Development Agency.

SDA is an agency under the United States Space Force that plans to deploy a network of interconnected satellites. It includes a transmission layer that will transmit data collected by the missile detection sensor satellite tracking layer. Each spacecraft is equipped with multiple laser communication terminals.

Optical terminals use lasers to connect satellites in orbit so that they can transmit data in space.
Tesat's terminals will be integrated with Lockheed Martin's satellites, which will become part of SDA's planned transmission layer Tranche 1 satellite to be launched by the end of 2024. Lockheed Martin also uses CACI's optical terminals for the Tranche 1 satellite.
All optical terminals installed on SDA satellites must comply with the technical specifications and standards issued by the organization. They must also be able to interoperate with terminals manufactured by other suppliers.

Interoperability with other manufacturers
As part of ground testing, Tesat's terminals must establish data communication links with reference modems, as well as Mynaric and CACI terminals. The terminal of Mynaric will be located on the Tranche 1 satellite of SDA manufactured by Northrop Grumman.
This achievement indicates that Tesat terminals comply with the technical specifications and standards released by SDA and can interoperate with third-party products, "said Thomas Reinartz, the company's CEO, in a statement.

The company pointed out that Kepler Communications has also selected the SCOTT80 optical terminal for its low Earth orbit commercial constellation.

Tesat Spacecom, headquartered in Germany, is establishing a US subsidiary to support military and commercial plans. The company is an independent subsidiary of Airbus Defense and Aerospace.

Tesat plans to start producing optical terminals on Merit Island, Florida. The company stated that to date, 46 Tesat terminals are on track and 180 are in production.

Source: Laser Network


Recomendações relacionadas

  • The new method can maintain beam quality while significantly improving the power of fiber lasers

    The new discovery by optical scientists has brought new vitality to fiber lasers. This innovative method significantly improves the power of lasers without reducing beam quality, and will become an important defense technology for future low-cost drones and remote sensing.The research teams from the University of South Australia, the University of Adelaide, and Yale University have demonstrated ne...

    2023-12-22
    Ver tradução

  • Generating dark and entangled states in optical cavities: unlocking new possibilities in quantum metrology

    Physicists have been working hard to improve the accuracy of atomic clocks, which are the most precise timing devices currently available. A promising way to achieve higher accuracy is to utilize spin squeezed states in clock atoms.Spin squeezed states are entangled quantum states in which particles work together to counteract their inherent quantum noise. These states provide incredible potential...

    2024-02-20
    Ver tradução

  • TDK introduces a new gold-wire-bonded optional NTC thermistor for laser diode temperature measurement

    TDK Corporation (TSE: 6762) announced the introduction of the new NTCWS series of NTC thermistors with gold wire bonding. These bonding NTC thermistors can be installed in packages via gold wire bonding to enable high precision temperature detection of laser diodes (LD) for optical communication. The series will begin mass production in September 2023.The use of LD devices in optical communication...

    2023-09-08
    Ver tradução

  • LOTMAXX Announces the Launch of a Multifunctional 3D Printer with Laser Cutting Function

    LOTMAXX has announced the launch of the ET model, a new type of 3D printer that can also be used as a laser cutting machine. According to the manufacturer, the core component is a fast direct extruder with a printing speed of up to 500 millimeters per second.LOTMAXX ET features an all metal casing with a printing volume of 250 x 250 x 265 mm. According to the announcement, as a special feature, th...

    2023-11-09
    Ver tradução

  • Cambridge University researchers use lasers to "heat and strike" 3D printed steel

    According to the University of Cambridge, researchers have developed a new method for 3D printing metal, which can help reduce costs and more effectively utilize resources. This method, developed by a research team led by the University of Cambridge, allows structural modifications to be "programmed" into metal alloys during 3D printing - fine-tuning their performance without the need for thousand...

    2023-11-03
    Ver tradução