chanelink logo
CHANELINK
Português

Researchers Obtaining Scientific Returns from Raman Spectroscopy for External Bioexploration Using Lasers

380
2023-10-23 15:09:27
Ver tradução

We investigated the potential of laser selection in a wide optical range from ultraviolet to visible light, and then to infrared (excitation wavelengths of 325, 532, 785, and 1064 nm), in order to combine and analyze extreme microorganisms related to Earth (such as Cryptomeria elegans, cold floating nematodes, and circular green algae), carbon water compound molecules, as well as simulated mineral mixtures (P-MRS, S-MRS, LRS, and JSC-1) of weathering layers on the Martian and lunar surfaces.

We demonstrate that the optimization of laser photon energy provides (at least one selected excitation wavelength) high-end quality Raman spectroscopy for each inspection sample. In most cases, the infrared spectral range is advanced for biological samples, while excitation within the visible and ultraviolet spectral ranges is usually advantageous, or at least sufficient to accurately identify/analyze mineral phases under luminescent laser spots on simulated planetary surfaces.

UV excitation does not always provide a significant contrast in Raman Stokes response to induced photoluminescence in the studied biomolecules. The most prominent feature in the Raman spectrum of biological samples is assigned to their specific pigments, and is also considered a biomolecular feature of extreme microorganisms. The key issue of the specific advantages and limitations of each specific excitation source means that research can obtain scientific returns from Raman spectroscopy for external biological exploration, such as the optimal trading between single or double excitation wavelengths of biological and geological spectral data.

Source: Laser Network

Recomendações relacionadas

  • A German research team has developed a new type of perovskite stacked battery

    According to relevant media reports, a research team from the Helmholtz Center in Berlin, Germany, and Humboldt University has jointly developed a new type of perovskite stacked battery. This battery has broken the world record for similar batteries with a photoelectric conversion efficiency of 24.6%. In the solar cell family, in addition to silicon-based solar cells, there are also thin-film so...

    02-08
    Ver tradução

  • The breakthrough of coherent two-photon lidar overcomes distance limitations

    Schematic diagram of experimental setupNew research has revealed advances in light detection and ranging technology, providing unparalleled sensitivity and accuracy in measuring the distance of distant objects.This study was published in the Physical Review Letters and was the result of a collaboration between Professor Yoon Ho Kim's team at POSTECH in South Korea and the Center for Quantum Scienc...

    2023-12-08
    Ver tradução

  • IoTech shapes the flexible future of 3D printed electronic products

    The rapidly developing IoTech enterprise headquartered in Israel will showcase at LOPEC 2024 how its disruptive digital manufacturing continuous laser assisted deposition technology shapes the future of microelectronics and additive manufacturing.Herv é Javice, co-founder and CEO of ioTech, commented, "We are delighted to be attending the LOPEC exhibition for the first time and showcasing ...

    2024-02-27
    Ver tradução

  • Research has shown that patterns on crystals can double the optical sensitivity of photodetectors

    Scientists from the Institute of Automation and Control Process at the Far East Branch of the Russian Academy of Sciences described the changes on the surface of monocrystalline silicon during laser processing. The author of this study placed the crystal in a methanol solution and applied a laser pulse lasting one thousandth of a second to the sample, with a pulse count ranging from five to fifty ...

    2024-04-01
    Ver tradução

  • EOS and AMCM will open a new UK Additive Manufacturing Excellence Center

    The University of Wolverhampton (UK), along with global 3D printing leaders EOS and AMCM, will collaborate to establish a new Centre of Excellence (AM) for Additive Manufacturing in the UK. This partnership will provide cutting-edge technology from EOS and AMCM, and focus on developing advanced materials and processes for high demand applications in industries such as aerospace, automotive, aerosp...

    2024-04-15
    Ver tradução