Português

The research team at the University of Electronic Science and Technology of China has developed three innovative photonic devices

799
2025-05-30 10:55:47
Ver tradução

Recently, Professor Nie Mingming from the Key Laboratory of Fiber Optic Sensing and Communication at the School of Information and Communication Engineering, University of Electronic Science and Technology of China, in collaboration with the University of Colorado Boulder, published a research paper titled "Cross polarized stimulated Brillouin scattering empowered photonics" in the top international journal Nature Photonics. For the first time, the cross polarized Brillouin gain characteristics in lithium niobate crystals were systematically revealed, and their efficient coupling mechanism with second-order nonlinearity was demonstrated. As a result, three innovative photonic devices were successfully developed, which can provide new solutions for next-generation optical communication, precision measurement, and quantum technology.

The strong gain characteristics of the cross polarized stimulated Brillouin effect in lithium niobate, combined with its ability to control multiple physical fields such as thermo optics and electro-optic, can provide a new design dimension for new light sources and photonic integrated chips. Three innovative devices have been researched and implemented. (1) Reconfigurable stimulated Brillouin laser: By utilizing the birefringence thermal optical effect and cross polarization stimulated Brillouin effect of lithium niobate crystal, it breaks through the limitation of traditional stimulated Brillouin lasers that are difficult to tune due to fixed cavity length, and achieves sub hertz narrow linewidth laser output with arbitrary wavelength adjustment. (2) Efficient mode converter: For the first time, the Brillouin enhanced four wave mixing effect inside the cavity has been achieved, and a multi-dimensional high-efficiency mode conversion device for polarization, transverse mode, and longitudinal mode has been developed. (3) Brillouin second-order laser and frequency comb: By utilizing the synergistic effect of cross polarization Brillouin effect and second-order nonlinearity, the near-infrared and visible dual band laser and frequency comb pumped by intracavity Brillouin laser have been achieved for the first time. With the maturity of thin-film lithium niobate photonics integration technology, it is expected to use the revealed cross polarization stimulated Brillouin effect to develop more innovative photonics devices in addition to the above-mentioned devices, achieve miniaturization and low-power operation on the chip, and bring changes to cutting-edge applications such as optical atomic clocks, high-precision gyroscopes, optical communication, and optical neural networks.

This study was supported by the National Natural Science Foundation of China and the Top Basic Research Achievement Cultivation Program of the University of Electronic Science and Technology of China.

Professor Nie Mingming from the University of Electronic Science and Technology of China is the first author and co corresponding author of the paper, while Professor Shu Wei Huang from the University of Colorado Boulder is the co corresponding author of the paper.

Source: Opticsky

Recomendações relacionadas
  • Gas reduction technology of fiber laser helps to improve the cutting quality of low-carbon steel

    The Mitsubishi GX-F Advanced series of artificial intelligence enabled fiber lasers now use patented gas and burr reduction technology to help improve cutting quality while reducing gas consumption when cutting low-carbon steel.Mitsubishi Laser's proprietary Agr Mix nozzle technology does not require an external mixing tank or high-pressure oxygen. The combination of low-pressure air and nitrogen ...

    2024-02-14
    Ver tradução
  • Jingyi Optoelectronics launches a transmittance detector to detect the near-infrared transmittance characteristics of plastic materials

    Laser welding plastic transmittance tester is an important industrial testing equipment used to measure the transmittance of plastic after welding, in order to evaluate welding quality and product performance. With the widespread application of plastic products in various fields, the requirements for plastic welding quality and transparency are also increasing. Therefore, laser welded plastic tran...

    2024-04-11
    Ver tradução
  • Halloween\Christmas Laser Processing Art Carnival !!

    Chanelink Halloween\Christmas Laser Processing Art CarnivalShow your design talent and win a cool laser engraver cutter.TimeUpload of work and canvassing period: October 25, 2023 - December 25, 2023Winner announcement time : December 29, 2023ContentEligible participant:Laser industry practitioners, enthusiasts, who must be at least 18 years old.Awards:First prize (1...

    2023-10-25
    Ver tradução
  • Optical properties of Xinggory Cy3.5 amine/NH2 labeling experiment

    The optical properties of the Cy3.5 amine labeling experiment are an important reason for its application in biomarkers and fluorescence imaging. Cy3.5 is a fluorescent dye belonging to the Cyanine dye family, with high molar extinction coefficient and quantum yield, making it excellent in trace analysis and fluorescence imaging.In the Cy3.5 amine labeling experiment, the dye covalently binds to s...

    2024-03-29
    Ver tradução
  • STL's new 160 micron fiber optic can meet emerging network and pipeline capacity requirements

    STL unveiled its new 160 micron fiber optic for the first time at the 2023 India Mobile Conference Trade Show.The company claims that its 160 micron fiber optic was conceptualized and developed at its Center of Excellence in Maharashtra, India, and its cable capacity is three times that of traditional 250 micron fiber optic. STL Company.After the launch of 160 micron fiber at the 2023 India Mobile...

    2023-11-01
    Ver tradução