Y-Axis doesn’t move and makes sounds

Today I wanted to do a cut. but the Y-axis move doesn’t work! On the first try to frame the project, the Y movement stopped making the sound it does when getting to the end of the frame but the project is larger… but, it hadn’t reached the end of the frame. Now, It doesn’t move anymore, making the same sound. I loosend and tied the belts, cleaned the frame, improved the screws. everything seemed to be ok.
I hope, I didn’t crash the motor?

Here my firmware settings

Blockquote $$

$0=10

$1=25

$2=0

$3=0

$4=0

$5=0

$6=0

$10=1

$11=0.010

$12=0.002

$13=0

$20=0

$21=0

$22=0

$23=3

$24=200.000

$25=3000.000

$26=250

$27=3.000

$30=1000

$31=0

$32=1

$100=80.000

$101=80.000

$102=139.000

$110=6000.000

$111=6000.000

$112=1000.000

$120=1000.000

$121=1000.000

$122=0.000

$130=410.000

$131=400.000

$132=200.000