chanelink logo
CHANELINK
Polski

Latest breakthrough! 3500W free output blue semiconductor laser

377
2024-09-03 13:51:31
Zobacz tłumaczenie

The 3500W free output blue semiconductor laser beam is output in a free space manner, with a rectangular spot directly acting on the material surface without the need for fiber optics or laser processing heads. This laser has a wavelength of 455 ± 10nm, with continuously adjustable power and a maximum output power of over 3500W. It is mainly used for non-ferrous metal cladding, quenching, etc., to greatly improve processing efficiency and quality.

Figure 1: 3500W Free Output Blue Light Semiconductor Laser Cladding Sample

Experiment 1


Figure 2 (a-e) OM images of a single layer at different powers; (f) Geometric dimensions; (g) Fusion efficiency; (h) Comparison of fusion efficiency and other research results; (i) Schematic diagram of high-power infrared laser and (j) high-power blue laser processing

The Institute of Special Materials at Shanghai Jiao Tong University developed a 3500W, rectangular spot (7.5 mm2) blue laser additive manufacturing equipment based on Guangdong Institute of Hard Science and Technology and Zhuo Jie Laser. Using directional energy deposition technology, pure copper was successfully deposited on Inconel 718 chromium nickel iron alloy substrate, achieving a cladding efficiency of 62.84 mm2/s.

——Achieving ultra-high efficiency in directed energy deposition of pure copper on Inconel 718 substrate with a 3500 W blue laser,Materials Letters,Volume 372,2024.

Experiment 2

Figure 3 (a) B-LMD process (b) B-LMD process schematic diagram

 



Figure 4 (c) Comparison of tensile properties between B-LMD pure copper and other additive manufactured pure copper

The New Materials Research Institute of Guangdong Academy of Sciences, based on the 3500W, rectangular spot (7.5 mm2) blue laser additive manufacturing equipment developed by Guangdong Institute of Science and Technology and Zhuojie Laser, successfully deposited pure copper material on 316L stainless steel substrate through laser metal deposition process, with a density of 97.9%, tensile strength of 244 ± 9 MPa, yield strength of 158 ± 6MPa, all of which are the highest reported values so far. The elongation at break can reach 14.7 ± 0.8%, and the comprehensive performance is better than that of pure copper samples prepared by SLM and MEAM processes.

——Comprehensive study of microstructural evolution and strengthening mechanism of high-performance pure copper prepared by blue laser metal deposition (B-LMD), Materials Science and Engineering: A.

Source: KCTII Institute of Technology

Powiązane rekomendacje

  • Laser direct writing technology for preparing micrometer scale heatable graphene de icing and anti icing surfaces broadens the preparation method of new de icing and anti icing devices

    Research backgroundIn transportation, industrial production, and practical life, icing often brings great troubles, and the most serious is that during the flight of an aircraft, key components once frozen will seriously affect navigation safety.The traditional passive deicing and anti icing strategies for aircraft, such as mechanical vibration and anti freezing liquids, have problems such as inco...

    2023-10-16
    Zobacz tłumaczenie

  • BWT 969nm semiconductor pump source

    Semiconductor laser pump sources, especially those with a wavelength of 969nm, have become the preferred choice for high-power/high peak energy disc lasers due to their reduced quantum losses and heat generation.The 3000W 969nm fiber coupled semiconductor laser system launched by BWT uses 800 μ m NA0.22 fiber to output flat top optical energy distribution, combining lightweight and excellent optic...

    05-09
    Zobacz tłumaczenie

  • Deere Laser's self-developed laser induced sintering technology, with LIF equipment orders exceeding 100GW in production capacity

    Recently, Deere Laser received mass production orders and bid confirmations for laser induced sintering (LIF) equipment from multiple top customers, with a cumulative production capacity exceeding 100GW.As an innovative technology iteratively developed by the company based on its own LIR technology and LIA technology, LIF technology has won industry recognition for its excellent efficiency improve...

    2023-09-18
    Zobacz tłumaczenie

  • Launching the world's strongest laser at a cost of 320 million euros

    Beijing, April 1st (Reporter Liu Xia) - The world's most powerful laser has been activated recently. On March 31st, the Physicist Organization Network reported that the system can enable laser pulses to reach a peak of 10 terawatts (1 terawatt=100 terawatts=1015 watts) within 1 femtosecond (1000 trillions of a second), which is expected to promote revolutionary progress in multiple fi...

    2024-04-03
    Zobacz tłumaczenie

  • Changing Optical Design: How Multi scale Simulation Improves the Efficiency of Modern Devices

    Optical equipment is an integral part of technologies such as data centers and autonomous vehicle, which are constantly developing to meet the needs of complex applications. The challenge faced by designers is to manipulate light at the wavelength scale to achieve the required optical properties, which requires precision at both the nano and macro scales. Nanoscale structures, such as those on LED...

    2024-03-02
    Zobacz tłumaczenie