Polski

Shanghai Optical Machinery Institute has made progress in laser assisted connection of metal carbon fiber composite heterojunction materials

920
2023-09-01 14:28:48
Zobacz tłumaczenie

Recently, the research team of Yang Shanglu from the Laser Intelligent Manufacturing Technology R&D Center of the Chinese Academy of Sciences Shanghai Institute of Optics and Fine Mechanics has made new progress in the laser assisted connection of metal carbon fiber composite heterostructure joints.

The team used an adjustable flat top rectangular semiconductor laser as a heat source to achieve the connection between high-strength steel and thermoplastic resin based carbon fiber composite materials. The relationship between the interface thermal history, interface forming mechanism, and joint performance of different materials was elucidated, and a new laser heat input process strategy was proposed.

The relevant research results are published in Composite Structures under the title of "Effect of international thermal history on bonding mechanism of laser assisted joint of QP980-FRTP with adjustable flat top rectangular laser beam".

Developing high-performance multi material hybrid structures is a development trend in the aerospace field. Carbon fiber reinforced thermoplastic composites have ultra-high specific strength and toughness, and can be mixed with metals to meet the requirements of structural lightweight and cost control. There are significant differences in physical and chemical properties between metals and composite materials, and existing methods for connecting dissimilar materials have shortcomings. It is urgent to develop high-quality and efficient new connection processes.

Figure 1. Laser assisted connection process, ultra fast laser surface treatment structure, and interface thermal history monitoring
The team studied the interface thermal history during laser assisted bonding, analyzed the temperature state of the resin matrix and its wetting behavior on the metal surface, and compared the effects of different interface thermal histories on interface bonding defects, chemical composition, joint strength, and failure behavior. By using the interface thermal history design method and laser thermal input process control, the ultimate interface temperature and sufficient insulation time have been achieved, which helps the complete melting and diffusion of the resin matrix on the metal surface, fills the micropores at the interface, promotes chemical bonding, and produces high-quality joints with peak loads above 10kN and shear strengths above 22MPa. The relevant research results have broad application prospects in aerospace and other related fields.

Figure 2. Relationship between interfacial thermal history and resin wetting behavior on metal surfaces

Source: Laser Manufacturing Network

Powiązane rekomendacje
  • Germany has developed direct laser welding technology to achieve adhesive free connection from fiber to chip

    Recently, researchers and their partners from the Fraunhofer Institute for Reliability and Microstructure (IZM) in Germany announced the successful development of a laser welding technology that can efficiently fix optical fibers onto photonic integrated circuits (PICs) without the need for adhesive bonding.This technology is developed in response to biophoton sensing technology, mainly utilizing ...

    2023-08-22
    Zobacz tłumaczenie
  • Shanghai Microsystems Institute has developed a high-speed photon detector with distinguishable photon numbers

    Recently, Li Hao and You Lixing's team from the Chinese Academy of Sciences Shanghai Institute of Microsystems and Information Technology developed an ultrahigh speed, photon number resolvable optical quantum detector with a maximum count rate of 5GHz and a photon number resolution of 61 by using the sandwich structure superconducting nanowires and multi wires working in parallel. The related rese...

    2024-07-12
    Zobacz tłumaczenie
  • BWT 969nm semiconductor pump source

    Semiconductor laser pump sources, especially those with a wavelength of 969nm, have become the preferred choice for high-power/high peak energy disc lasers due to their reduced quantum losses and heat generation.The 3000W 969nm fiber coupled semiconductor laser system launched by BWT uses 800 μ m NA0.22 fiber to output flat top optical energy distribution, combining lightweight and excellent optic...

    05-09
    Zobacz tłumaczenie
  • Artificial intelligence accelerates the process design of 3D printing of metal alloys

    In order to successfully 3D print metal parts to meet the strict specifications required by many industries, it is necessary to optimize process parameters, including printing speed, laser power, and layer thickness of deposited materials.However, in order to develop additive manufacturing process diagrams that ensure these optimal results, researchers have to rely on traditional methods, such as ...

    2024-02-27
    Zobacz tłumaczenie
  • Researchers have reinvented laser free magnetic control

    In a significant advancement in material physics, researchers from Germany and the United States have theoretically demonstrated that only extremely thin materials need to be α- RuCl3 can be placed in an optical cavity to control its magnetic state.This discovery may pave the way for new methods of controlling material properties without the use of strong lasers.The Role of Optical Vacuum W...

    2023-11-09
    Zobacz tłumaczenie