Polski

Pressure sensing using dual color laser absorption spectroscopy

491
2024-03-09 13:58:51
Zobacz tłumaczenie

The research team led by Professor Gao Xiaoming and Professor Liu Kun of the Chinese Academy of Sciences Hefei Institute of Physical Sciences recently designed a concentration independent pressure sensing technology for high-temperature combustion diagnosis. This method is based on dual color laser absorption spectroscopy.

The results of this study have been published in Optics Letters.
Aircraft engines are transitioning towards high-temperature and high-pressure combustion to improve thermodynamic efficiency. Pressure is a key parameter for monitoring engine performance and diagnosing engine faults. However, traditional contact pressure sensors can disrupt combustion flow and are limited by the temperature tolerance of the sensor material.

The researchers of this study designed a non-contact pressure sensing technology for high-temperature environments and tested it at temperatures up to 1300 K. This study mainly addresses the challenge of considering the influence of molecular concentration on gas pressure measurement in such an environment.

Researchers have found that by connecting double absorption lines to widen the collision line width, concentration variables can be alleviated. This breakthrough enables researchers to achieve concentration independent pressure measurements.

To verify this discovery, considering that the main product of hydrocarbon fuel combustion systems is H2O, the team used double absorption lines of H2O near 1343 nm and 1392 nm in a precisely designed heating absorption cell. They each achieved 50 μ S and 3% time resolution and pressure measurement uncertainty.

Source: Laser Net

Powiązane rekomendacje
  • Mechanism of Time Power Modulation Increasing Weld Depth in High Power Laser Welding

    Researchers from the Hanover Laser Center and Leibniz University in Germany reported on the mechanism of increased welding depth during time power modulation in high-power laser beam welding. The related paper titled "Mechanisms of Increasing Welding Depth during Temporary Power Modulation in High Power Laser Beam Welding" was published in Advanced Engineering Materials.Understanding the basic mec...

    2024-12-18
    Zobacz tłumaczenie
  • From Colored Glass Windows to Lasers: Nanogold Changes Light

    For a long time, craftsmen have been fascinated by the bright red color produced by gold nanoparticles scattered in colored glass masterpieces. The quantum origin of this optical miracle has always been mysterious, until modern advances in nanoengineering and microscopy revealed the complexity of plasma resonance.Now, researchers are preparing to push nano plasma technology, which was once used fo...

    2024-01-02
    Zobacz tłumaczenie
  • Southeast University makes new progress in quantum efficiency research of van der Waals light-emitting diodes

    Recently, Professor Ni Zhenhua from the School of Electronic Science and Engineering at Southeast University, Professor Lv Junpeng from the School of Physics, Professor Liu Hongwei from the School of Physical Science and Technology at Nanjing Normal University, and Professor Zhou Peng from the School of Microelectronics at Fudan University collaborated to propose a van der Waals light-emitting dio...

    2024-10-28
    Zobacz tłumaczenie
  • Laser Wire Solutions and HumanTek Jointly Enter the Korean Laser Wire Stripping Market

    Recently, Laser Wire Solutions officially welcomed its important distribution partner in South Korea - HumanTek. This cooperation marks the official establishment of HumanTek as a branch of Laser Wire Solutions in Korea, and both parties will work together to provide excellent services for the Korean laser wire stripping market.HumanTek, with its deep foundation in the Korean market and strong pro...

    2024-07-03
    Zobacz tłumaczenie
  • Acta: Revealing the mechanism of defect formation in additive manufacturing

    Main author: Yanming Zhang, Wentao Yana*The first unit: National University of SingaporePublished Journal: Acta MaterialiaResearch backgroundIndustry pain point: Although laser powder bed melting (LPBF) technology can manufacture complex components, the lack of consistent product quality is still the core bottleneck restricting its industrial application. Research has shown that up to 35% of proce...

    02-21
    Zobacz tłumaczenie