Polski

Aston receives £ 600000 to address the surge in energy needed for data centers

38
2025-10-24 10:47:16
Zobacz tłumaczenie

A researcher from Aston University in Birmingham, UK, has received a grant of £ 625000 (approximately $850000) to help address the energy surge required for data centers.

The UK’s Royal Academy of Engineering has announced the latest recipients of its fellowships which support engineers to solve a wide range of society’s challenges. Data center energy demand is described as “one of today’s most pressing challenges”.

Dr Aleksandr Donodin who works in the Aston Institute of Photonic Technologies (AIPT) is one of just 12 researchers to be granted funding this autumn. He will be examining fiber-optic networks to find solutions to the increasing power demands of data centers.

The International Energy Agency (IEA) works with governments and industry to safeguard energy for the future and predicts that from 2024 to 2030 data centers energy consumption will grow by around 15% per year, more than four times faster than the growth of total electricity use from all other sectors.

 

Dr. Aleksandr Donodin


Bismuth-doped fiber amplifiers

Donodin will be exploring the use of the networks and bringing together bismuth-doped fiber amplifiers which have tiny amounts of bismuth added to them, and optical frequency combs which are used to precisely measure and control light. It will be the first time this combination is explored in detail and if successful “could cut power consumption in optical networks by 30–50% per bit,” says the Aston announcement. It will also enable O-band range of light wavelengths to reach transmission capacities beyond 200 terabytes per second.

Donodin said, “I am delighted to receive this fellowship for my research which is called Next Generation of Energy-efficient Optical Regional and Data Center Connections. Beyond its technical ambitions, the project strengthens Aston University’s role as a hub for sustainable, next-generation optical networks - reinforcing the UK’s leadership in critical digital technologies.”

He added, “To translate the technology to real world, the project will connect everyone from the top to the bottom of the telecom supply chain. We will work closely with device suppliers like Lightera and Pilot Photonics, draw on the expertise of equipment manufacturers like Coherent and Nokia Bell Labs. And finally, we will collaborate with Japan-based telecom operator KDDI on implementing the developed technologies for real world systems.

The research fellowships program is funded by the UK Government’s Department for Science, Innovation and Technology and supports early-career researchers to become future research leaders in engineering. The fellowships are designed to advance excellence in engineering by providing funding for five years to allow awardees the freedom to concentrate on basic research in any field of engineering. Amounts awarded are up to £625,000 over five years.

Professor Jonathan Cooper FREng FRSE, chair of the Academy’s research fellowships steering group, commented: “This cohort will work on ambitious programs of research that address many of today’s societal challenges, including those around healthcare and an ageing population as well as the environment, sustainability and net-zero”

Source: optics.org

Powiązane rekomendacje
  • Construction of Advanced New Laser Research Centers in American Universities

    The ATLAS R&D center is expected to be completed by mid-2026!A powerful new laser research facility located on the Foothills campus of Colorado State University will begin construction this month. The facility is planned to be put into use in mid-2026 and is the result of 40 years of laser development research at Colorado State University. It is a collaboration with the Fusion Energy Science P...

    2024-10-30
    Zobacz tłumaczenie
  • Solar cell laser processing deserves attention

    Laser processing is a relatively emerging non-contact processing method that utilizes the high energy of a beam of light to interact with materials and instantly vaporize or change their properties to achieve the expected manufacturing effect. It has gradually been promoted and applied in China in the past 20 years. Due to the different types, pulse widths, and wavelengths of laser generators, the...

    2023-10-31
    Zobacz tłumaczenie
  • The Influence of Laser Beam Intensity Distribution on Lock Hole Geometry and Process Stability under Green Laser Radiation

    Researchers from the University of Aveiro in Portugal and the School of Engineering at Porto Institute of Technology (ISEP) in Portugal reported a study on the influence of laser beam intensity distribution on the geometric shape and process stability of lock holes under green laser radiation. The relevant paper titled "Influence of Laser Beam Intensity Distribution on Keyhole Geometry and Process...

    03-26
    Zobacz tłumaczenie
  • Monport enhances K40 laser cutting machine through air assisted technology

    Monport Laser has launched its latest breakthrough innovative product, the Monport 40W Pro CO2 laser engraving machine, with air assistance. This cutting-edge machine has set a new standard for precision carving, providing excellent performance and a series of upgraded functions. The Monport 40W Pro surpasses its predecessor, the Monport 40W Laser, in all aspects, making it a game-changing solutio...

    2023-10-11
    Zobacz tłumaczenie
  • Germany's leading optoelectronics industry (Jenoptik) in the first half of the gold over 4.2 billion

    On August 9, local time, Germany's leading optoelectronics company Jenoptik released its 2024 second quarter interim financial results forecast. The financial data show that the company in the challenging market environment still shows strong growth momentum.In the first half of the year, Jenoptik achieved significant growth in revenue and earnings before interest, taxes, depreciation and amortiza...

    2024-08-15
    Zobacz tłumaczenie