Polski

The research team at the University of Electronic Science and Technology of China has developed three innovative photonic devices

603
2025-05-30 10:55:47
Zobacz tłumaczenie

Recently, Professor Nie Mingming from the Key Laboratory of Fiber Optic Sensing and Communication at the School of Information and Communication Engineering, University of Electronic Science and Technology of China, in collaboration with the University of Colorado Boulder, published a research paper titled "Cross polarized stimulated Brillouin scattering empowered photonics" in the top international journal Nature Photonics. For the first time, the cross polarized Brillouin gain characteristics in lithium niobate crystals were systematically revealed, and their efficient coupling mechanism with second-order nonlinearity was demonstrated. As a result, three innovative photonic devices were successfully developed, which can provide new solutions for next-generation optical communication, precision measurement, and quantum technology.

The strong gain characteristics of the cross polarized stimulated Brillouin effect in lithium niobate, combined with its ability to control multiple physical fields such as thermo optics and electro-optic, can provide a new design dimension for new light sources and photonic integrated chips. Three innovative devices have been researched and implemented. (1) Reconfigurable stimulated Brillouin laser: By utilizing the birefringence thermal optical effect and cross polarization stimulated Brillouin effect of lithium niobate crystal, it breaks through the limitation of traditional stimulated Brillouin lasers that are difficult to tune due to fixed cavity length, and achieves sub hertz narrow linewidth laser output with arbitrary wavelength adjustment. (2) Efficient mode converter: For the first time, the Brillouin enhanced four wave mixing effect inside the cavity has been achieved, and a multi-dimensional high-efficiency mode conversion device for polarization, transverse mode, and longitudinal mode has been developed. (3) Brillouin second-order laser and frequency comb: By utilizing the synergistic effect of cross polarization Brillouin effect and second-order nonlinearity, the near-infrared and visible dual band laser and frequency comb pumped by intracavity Brillouin laser have been achieved for the first time. With the maturity of thin-film lithium niobate photonics integration technology, it is expected to use the revealed cross polarization stimulated Brillouin effect to develop more innovative photonics devices in addition to the above-mentioned devices, achieve miniaturization and low-power operation on the chip, and bring changes to cutting-edge applications such as optical atomic clocks, high-precision gyroscopes, optical communication, and optical neural networks.

This study was supported by the National Natural Science Foundation of China and the Top Basic Research Achievement Cultivation Program of the University of Electronic Science and Technology of China.

Professor Nie Mingming from the University of Electronic Science and Technology of China is the first author and co corresponding author of the paper, while Professor Shu Wei Huang from the University of Colorado Boulder is the co corresponding author of the paper.

Source: Opticsky

Powiązane rekomendacje
  • AMC Theatres launches advanced laser projection technology upgrades

    AMC Cinema has long been known as the largest cinema operator in the United States and the world, and has completed upgrades to almost all its venues in the broader Chicago area, including advanced laser projection technology.The technological reform of this chain of stores has made Chicago one of the first areas in AMC's footprint to benefit from CinIonic's cutting-edge projection technology.In e...

    2023-12-23
    Zobacz tłumaczenie
  • Chinese University of Science and Technology Reveals a New Physical Mechanism of Photoinduced Particle Rotation

    Light has angular momentum properties. Circularly polarized or elliptically polarized beams carry spin angular momentum (SAM), while beams with helical phase wavefronts carry orbital angular momentum (OAM). During the interaction between light and particles, the transfer of angular momentum can generate optical torque, driving particles to rotate. Among them, the transfer of optical spin angular m...

    2024-06-25
    Zobacz tłumaczenie
  • Rapid and convenient preparation of small-sized metal nanoparticles using microchip lasers

    Liquid pulse laser ablation is a reliable and versatile technique for producing metal nanoparticles in solution. Its advantages include no reducing agent, simple operation, high purity, no need for purification steps, and environmental processing conditions, making it the preferred method for traditional metal NP preparation.The widespread adoption of PLAL in scientific and industrial research has...

    2024-01-30
    Zobacz tłumaczenie
  • MIT research enables 3D printers to recognize new materials

    According to scientists at MIT, mathematical formulas developed by MIT researchers and other institutions can significantly improve the sustainability of 3D printing.Issues with 3D printing of plastics3D printers typically use mass-produced polymer powders to print parts, which are consistent and predictable, but also difficult to recycle.Other more environmentally friendly options also exist and ...

    2024-04-18
    Zobacz tłumaczenie
  • Tongkuai will participate in the laser fusion energy research program

    The US Department of Energy recently allocated $42 million to support the development of laser fusion technology and designated three new research and innovation centers. This strategic investment aims to promote laser based nuclear fusion to play an important role as a clean and sustainable energy source in the future. Trumpf is one of the main participants known for its laser expertise and activ...

    2024-02-01
    Zobacz tłumaczenie