How to use Z-axis offset when cutting materials?

Christian

Kategorie:

Laser

Tagi:

Laser cutting

372

Zobacz tłumaczenie

10-10

Is it best to use Z offset when cutting material?

For example,
Focus is 5mm from Tip of laser
Wood Material is 3mm thick

Should i use an offset of 1.5mm?
What about for 6mm material? 3mm Offset?

What is best practice?

Kevin

10-11

for 3mm material, the difference will be barely visible, unless you use a very short focal length.

with a 1.5" focal, and 6mm material, it begins to be useful to lower the head by 2mm. in my experience, it is not the best to target the exact middle of the material.

with a 2,5" focal, this makes no difference offsetting the head for such a small distance.

Zobacz tłumaczenie

Odpowiedz

Relewantne rekomendacje