chanelink logo
CHANELINK
Polski

RDC6563F

Kategorie:
Ruida
910
2
Zobacz tłumaczenie
2023-11-02

Hi, 

My machine has a rdc6563f controller an i use rdcutist 3

I have worked out most issues but i cannot find how to continiue a cut after a collision.

If i have a part stand up and the laser head touchs it , the machine stops and an alarm is then on the screen(collision).It asks to press esc to clear.I clear the alarm and when I then press start it does nothing.

The only way i can get it to move is to completley reset the machine.

Do you know the process to continiue the  cutting without a total restart/reset?

Rod
C

    • blue sea

      2023-11-02
      Hello! When a collision occurs, press the [←] button on the panel to clear all alarm records. If the collision alarm is enabled, the cutting head will be automatically raised to a safe height if it hits the plate during movement. After resetting, the processing can be continued, and if the capacitance value is incorrect, the capacitance can be recalibrated.
        Zobacz tłumaczenie
        Odpowiedz

      • Jimmy-He

        2023-11-02
        Please read the version and take a photo and send it to us
        Zobacz tłumaczenie
        Odpowiedz
      Relewantne rekomendacje
      Zbierz
      Zgłoś