chanelink logo
CHANELINK
Polski

rdc6563fg + SMC ITV2030

Kategorie:
Ruida
Tagi:
819
5
Zobacz tłumaczenie
2023-07-10 
Hello!
I can't adjust the gas pressure regulator.
in the setting, the slok costs 1MPa. ITV2030 shows 0.75MPa.
Can you tell me how to do the same?
C

    • Snow Sun

      2023-07-17
      Hi, you can use the multi-meter to test the pressure voltage of the controller. normally it is in the 0~10V.
 So just measure the voltage and the actual air pressure. and then do the linearization between the voltage and the actual pressure in the software
        Zobacz tłumaczenie
        Odpowiedz
        • Pavel_TT

          : I tried doing it in rdworks 3.0. The program does not make changes.

      • Rene

        2023-09-25
        Em qual saida da placa é conectado?
          Zobacz tłumaczenie
          Odpowiedz
          • Rene

            : RDC6563F

          • blue sea
            Odpowiedz
            @Rene

            : Hello! RDC6563F motor z-axis interface, pin port PIN24 (orange), signal name ANALOG.

        Relewantne rekomendacje
        Zbierz
        Zgłoś