chanelink logo
CHANELINK
Polski

Console Message

Kategorie:
Laser
Tagi:
822
1
Zobacz tłumaczenie
2023-05-30

Is there anyway to turn up the logging in the console? My machine randomly stops but the console thinks everything is fine when it has in fact destroyed yet another product.

Short of re-wiring my house I would like some kind of solution for this problem… SD Card, Bluetooth, more console logging, really anything.

I followed the guide for connection issues two computers ago and it still randomly fails. So to me the issue is

1. This machine is made of cotton candy and its raining
2. USB sucks
3. Lightburn doesnt say when communication stops
If I could fix 2 or 3 that would be most cost effective.
C

    • Clarence

      2023-05-31
      Lightburn will display disconnected if it knows it’s lost the connection… However some grbl machine have some issues staying connected.
There is a show all in the console window and it will display whatever comes back from the machine.
I doubt it will buy you anything since Lightburn thinks it’s sending something or busy and isn’t going to get anything from the device in this state.
You can try a better usb cable and keep things as short as possible…
Sorry I’m not much help, but usb isn’t the best mode for these…
I have a fiber that uses usb, and I have no problems with it… but the grbl controllers will sometimes fail…
        Zobacz tłumaczenie
        Odpowiedz
      Relewantne rekomendacje
      Zbierz
      Zgłoś