50WJPT Fiber no longer connecting to computer. USB Error

Terrelle

Kategorie:

Laser

Tagi:

LightBurn

596

Zobacz tłumaczenie

2023-04-13

Hey, I’ve been a CO2 laser user now for just over a year, and recently received my 50WJPT Fiber… All was going great until today. Long story short, a customer happened to somehow disconnect the USB cable, or step on it, or something as the laser was running a project as he was leaving. I went back to the machine and just assumed it was complete and went to load the next project and Lightburn said that the Laser was disconnected… So, I unplugged the USB and reconnected it and I got the following error:

Windows has stopped this device because it has reported problems. (Code 43)
A request for the USB device descriptor failed.

Having seen that before with the CO2, I re-ran the setup to reinstall the drivers and that didn’t work. I removed the cables in question and replaced with different ones, and that didn’t work… I uninstalled, reinstalled Lightburn, uninstalled the drivers, ran windows update, restarted a million times and that didn’t work… So, I opened up the laser, and plugged a USB-Printer cable directly to the controller board, and that didn’t work… So now I’m 100% stumped. I’ve tried every USB port on this computer, I’ve tried absolutely everything I can think of and I cannot get the machine to speak to the computer. I don’t have a laptop to try so I’m gonna have to figure this out, but I need some assistance I think…

Can anyone point me in the right direction?

thanks in advance

Liam

2023-04-14

I also had problems with a stable USB connection at the beginning. The connection was constantly being re-established and then severed again shortly afterwards. Cables and plugs brought no solution. Then I opened the laser housing - but first unplugged it - . I then reinstalled the controller board galvanically separated from the bracket. To do this, I reinstalled the controller with plastic screws and spacers so that there is no conductive connection between the controller and the bracket. That solved the problem in my case.

Zobacz tłumaczenie

Odpowiedz

Relewantne rekomendacje