In industrial production, the noise generated by the operation of chillers is a common problem. Noise not only affects the working environment, but may also indicate internal problems with the equipment. Here are some reasons and solutions for excessive noise in chillers:1. Installation environmentThe installation environment of a chiller has a s...
2024-12-1826911Working principle of laser rust removal machineLaser rust removal machine is a high-tech equipment that uses a high-energy density laser beam to instantly hit the surface of the object being removed, vaporize the dirt, and achieve rust removal effect. The laser beam of the laser rust remover can not only remove rust, but also remove substances such...
2024-12-1723410Suddenly a large number of overscan blanks appear, which setting is wrong?
2024-12-1230050Hello I have a little problem. When I try to frame my project on Creality Falcon 2 it fails because every time it goes like left and down and the laser starts beeping. But when I use another PC it works completly fine. Does anyone know what the problem is?
2024-12-1340720What is the reason for the jumping of the laser marking machine?Many people encounter jumping problems when using laser marking machines, which may be caused by the following factors:1. Machine malfunction: Long term non-stop operation of the laser marking machine during use can cause the equipment to overheat, thereby affecting its working effic...
2024-12-17277011. Check the power connection cableCarefully inspect all power connection wires of the krypton lamp, including plugs, sockets, and wiring, for any looseness, detachment, damage, or other issues. If the connecting wire is found to be loose, it needs to be re plugged tightly; If there is damage, a new connecting wire needs to be replaced.2. Check i...
2024-12-1625600I would like to index a foil off a small spool using the rotary unit (repeating shape). Any ideas?
2024-12-0925250have a Creality Falcon2 22 watt laser. I am running the most current version of a licensed version of Lightburn on a Dell XPS with Windows 11. Everything was working fine yesterday but when I went to run a file from yesterday and a new one from today both frame and engrave upside down/backwards. I even went as far as to delete Lightburn and reinsta...
2024-12-1129330Hello. I jusy bought the new Creality rotary chuck to go with my Elegoo Phecda. I have the chuck plugged into the y axis cable. In lightburn, I have the rotary tool enabled, step set to what was provided in the manual, and measurements of the object. I also turned off the homing feature for my after market limit switches.The problem is that, when ...
2024-01-1622620The use environment of the cleaning machine leads to a weakened effect1. High or low ambient temperature: Laser cleaning machines are generally suitable for ambient temperatures between 5 ℃ and 35 ℃. If the ambient temperature is too high or too low, it will affect the normal operation of the laser cleaning machine, resulting in a weakened cleaning...
2024-12-1325300Reasons for laser weld indentation problemDuring the laser welding process, the welding area is subjected to high temperatures, which can cause deformation due to thermal expansion and contraction, resulting in a concave weld seam. In addition, the selection of welding materials and welding parameters can also affect the occurrence of weld indentat...
2024-12-1225410Reasons for the appearance of color in laser welding seamsDuring laser welding, if the welding parameters are not appropriate, it often leads to the appearance of color in the weld seam. This problem mainly occurs on high reflective materials such as stainless steel, aluminum alloys, and titanium alloys. After analysis, in addition to inappropriate...
2024-12-1125600I’ve had my laser for A. Bout. And the horizontal lines are starting to bump or drag. I have to keep this fresh and people’s minds because.
2024-12-1021110When choosing a laser cleaning machine, to ensure the selection of suitable equipment, users need to pay attention to and confirm the following key parameters:1、 Laser powerLaser power is an important factor affecting the cleaning effect and speed. Generally speaking, the higher the power, the better the cleaning effect and the faster the speed. ...
2024-12-1033400Handheld laser welding machines, as an important tool in modern welding technology, have been widely used in various industries due to their high efficiency, precision, and flexibility. However, correct operating techniques and safety precautions are key to ensuring welding quality and operator safety. This article will provide a detailed introduct...
2024-12-0923800
- Brak danych
Polski
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski