1. Laser cutting machine control software: What are the laser cutting machine control systems? What is control software?The control system and software are related to the material you are cutting. They fall into two categories: metal and nonmetal. Details should be subdivided. It's better to explain what materials you want to cut and give you targ...
2022-12-261.1K11Each extruder is equipped with a transmission device, which is used to connect the transmission output shaft and the main reducer input shaft that are not in the same straight line, and ensure that the included angle and distance between the two shafts can still transmit power stably and reliably under the condition of frequent changes. What is the...
2022-12-241.1K00Laser cutting control system is the key functional component of laser cutting equipment. As the core of laser cutting equipment, the laser cutting control system forms a set of laser cutting solutions covering typesetting, cutting, NC and other processes by integrating key technologies such as CAD, CAM, NC, etc., to achieve good compatibility betwe...
2022-12-241.1K01Press Z-axis to move manually on the panel, and the cutting head does not move
2022-12-231.1K10When working, there is light. Press the Spot button and there is no light
2022-12-231.2K10What should we do if the laser keeps emitting light?
2022-12-231K11USB is not connected (with COM port)
2022-12-201K20Setting the cutting point is invalid.
2022-12-2089610Precision adjustment of glue sprayed upper.
2022-12-191.2K10The mixed cutting head cannot be started.
2022-12-191K10There are many processing methods for material cutting. Factors that should be considered when choosing a processing method include material type, material thickness, part geometry, edge quality, output, allowable heat input or mechanical force level, dimensional tolerance, capital cost and operating cost.What are the differences between la...
2022-12-201K00The cutting head cannot be controlled, and the working indicator of the height adjuster does not flash.
2022-12-161K10CCD software camera parameter debugging
2022-12-1696610I have a new Co2 laser (upgraded from an LED).I have it all up and using latest version of Lightburn to operate the laser with an RDC6442S-B.It operated OK for about 20 minutes and then problems.Using lightburn the machine will follow the pattern programmed, but no laser operating.It has been doing this now for about 5-6 weeks. The manuf...
2022-12-1694200
- Brak danych
Polski
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski