Please tell me how to deal with the servo hitting the limit during automatic operation?

Aaron

2023-03-08

794

1

0

A question about LightBurn behavior. I made a “coin” that I am going to use as a sort of business card. I got the idea from The Louisiana Hobby Guy video. It cuts out the empty space in the coin and the text is what remains. I’m using the settings below.I created a virtual array of 32 coins. When I first started burning, t...

Abel

2023-03-08

1.3K

1

0

Hi everyone. I’m having an issue in Lightburn when enabling the wobble effect setting. The issue is that the wobble isn’t cutting along the original path line, but rather gravitating toward the bottom of the cut. If I’m not mistaken, the wobble effect must run along the original path line equidistantly.Please see the photo...

Williams

2023-03-08

837

1

0

Recently got a used Shapeoko XXL with a 7w Jtech laser. I set lightburn up using Ben Myers setup video and everything seemed to work fine. After a few projects I used the CNC and when I tried to go back it wouldn’t let me return to my set origin, it would try to return to the machine origin.For context the project I am working on is l...

Gilbert

2023-03-07

1.1K

1

0

Currently running a FoxAlien 80w diode with their branded rotary attachment. No matter how I set it up, I continue to get a flat edge on the beginning of the design rather than the design itself.Any suggestions?

Clarence

2023-03-07

1.1K

1

0

The servo motor moves intermittently and equidistantly. Assuming that the distance of each movement is 50mm, the calculated pulse is with a decimal point, which will cause cumulative error. Is there any solution?

Nugent

2023-03-07

1.2K

1

0

In industrial applications, we often use laser ranging sensors because they can accurately estimate the distance to the target through very weak optical signals. In addition, it can record and process the time from the light pulse sending to receiving back, so as to measure the target. So, what problems should we pay attention to when using laser d...

Liam

2023-03-07

998

0

0

Working principle of laser water chillerA certain amount of water is injected into the case, and then the water is cooled by the cooling system of the water chiller. The cooling water is circulated to the laser equipment through the water pump, and the cooling purpose is achieved by reciprocating circulation.Advantages of laser chiller1. Th...

roy

2023-03-07

936

0

0

Hi,I am about to finalize my order of CF-30 which has a “cloudray integrated control card” and also a “BJJCZ Control board”.The later, I assume to be working fine with Lightburn (with galvo license), correct?The CF-30 is delivered with a touchscreen control panel, which runs with a self-developed software by CloudRay. Can...

Jamie

2023-03-06

911

1

0

I have been trying to find out if there is a way to turn down the power supply to match my tube. I did a ramp test and my tube is rated to max out at 26ma but the controller is only at 70%. I want to make 26ma 100% so no one over drivers the tube. Is this possible?

David

2023-03-06

1.1K

1

0

I just got my sculpfun s9 setup with lightburn. Dont understand why it is printing mirrored to the Y Axis. Change Device Setting Origin, using the 4 options, computer screen follows the setting but its always mirror on the Y Axis. I need help please.

Kevin

2023-03-06

1.2K

1

0

Downloaded a SVG file fro Etsy.Transfered the file to Lightburn but the image just blinks on and off when selected.Why?

Aaron

2023-03-06

1.6K

1

0

Master, why do some encoders of servo motors need to be zeroed when they are removed or replaced. What kind of encoder should be zeroed and what kind of encoder should not be adjusted.

Williams

2023-03-06

1.1K

1

0

Now many motor factories have begun to use motor assembly lines to produce motors, which not only greatly improves the efficiency and saves a lot of labor costs, but also is better than manual assembly. It is quite convenient to match a good detection system. So what are the principles for the layout of motor assembly lines as a manufacturer of mot...

Abel

2023-03-06

963

0

0

Hi friends! Please see attached pic, there is a visible jittering while the laser head changes direction from the vertical to horizontal movement, immediately after the turn, everything ok on slow speed but appears on medium and high, any suggestions how to fix it please? ThanksPS: could it be because of the table with the laser slightly unstable...

Cyril

2023-03-04

1K

1

0