Nederlands

The estimated output value of the LiDAR market in 2029 is expected to reach 5.352 billion US dollars

559
2025-01-22 14:14:49
Bekijk vertaling

Market research firm TrendForce Consulting released an industry insight report today, stating that currently LiDAR is mainly used in the automotive market for passenger cars and unmanned taxis, while in the industrial market it supports applications such as robotics, factory automation, and logistics.

The report points out that driven by Level 3 and more advanced auto drive system system and logistics transportation, it is estimated that the output value of the lidar market will grow from 1.181 billion US dollars in 2024 (IT Home notes: about 8.665 billion yuan at present) to 5.352 billion US dollars in 2029 (about 39.267 billion yuan at present), with a compound annual growth rate of 35%.

Market output value of automotive LiDAR from 2024 to 2029



Market output value of industrial LiDAR from 2024 to 2029

Faced with market competition pressure, automobile manufacturers not only actively adopt advanced technologies such as adaptive headlights and through type taillights, but also continue to introduce laser radar technology into passenger cars to achieve advanced driving assistance systems and Level 3 autonomous driving functions, mainly promoting car manufacturers such as Volvo, General Motors, Audi, Volkswagen, BMW, Hyundai, Hongqi, Changan, Ideal, Wenjie, NIO, Toyota, Nissan, etc.

Lidar can assist traffic detection systems, helping traffic regulatory authorities collect accurate lane usage data in real-time to identify solutions to improve traffic flow and enhance pedestrian safety. Household appliances such as robotic vacuum cleaners and companion robots have also adopted LiDAR technology to achieve synchronous positioning and map construction (SLAM).

Source: Laser Manufacturing Network

Gerelateerde aanbevelingen
  • Electron beam welding process for thick steel plate of turbine at Aachen Institute of Technology in Germany

    Researchers from the Welding Research Institute of Aachen University of Technology in Germany reported on the development of a stable welding process for electron beam welding of thick plates used in the construction of offshore wind turbines. The relevant research results were published in Materials Science and Engineering Technology under the title "Development of a robust welding process for el...

    2024-07-09
    Bekijk vertaling
  • Chip guided beam for new portable 3D printers

    Imagine being able to carry a 3D printer with you and quickly create low-cost objects, such as fastening bicycle wheels or parts needed for critical medical surgeries. Scientists from the Massachusetts Institute of Technology (MIT) and the University of Texas at Austin have combined silicon photonics and photochemical technology to successfully develop the first chip based 3D printer, taking a cru...

    2024-06-18
    Bekijk vertaling
  • Scientists have conducted a series of studies on the mechanical properties and flame retardancy of laser formed Ti40 flame-retardant titanium alloy

    Recently, Professor Huang Chunping's team from Nanchang University of Aeronautics and Astronautics conducted a series of studies on the mechanical and flame retardant properties of laser formed Ti40 flame retardant titanium alloy. The research team used typical Ti40 flame-retardant titanium alloy as the research object and prepared Ti40 flame-retardant titanium alloy using LSF technology. The micr...

    2023-08-15
    Bekijk vertaling
  • Hamamatsu Photonics completes construction of new factory area

    Recently, Hamamatsu Photonics in Japan completed the construction of a new building at Miyakoda Manufacturing Co., Ltd. in Hamami ku, Hamamatsu City. The completion ceremony was held on July 29th, and the factory will start full production in November 2024, increasing overall production capacity by 2.5 times.Source: Hamamatsu PhotonicsIt is reported that Hamamatsu Photonics focuses on the developm...

    2024-08-01
    Bekijk vertaling
  • NASA will demonstrate laser communications from the space station

    NASA's ILLUMA-T payload communicates with the LCRD via laser signals.NASA uses the International Space Station, a spacecraft the size of a football field orbiting the Earth, to learn more about living and working in space. For more than 20 years, the space station has provided a unique platform for investigation and research in the fields of biology, technology, agriculture and more. It is home to...

    2023-09-02
    Bekijk vertaling