Nederlands

Tsinghua University makes progress in the field of pre sensing optical computing

296
2024-08-05 14:03:15
Bekijk vertaling

In the era of the Internet of Things, visual image sensors, as key devices in the intelligent society, are embedded in various devices such as mobile communication terminals, smart wearable devices, automobiles, and industrial machines. With the continuous expansion of applications, higher requirements have been put forward for the system power consumption, response speed, safety performance, and other aspects of sensors. In the traditional "sensory transmission computing" link, the access speed of memory and communication bandwidth have gradually become the main bottlenecks limiting system power consumption and speed. Moving the computing unit closer to the sensing unit has gradually become a powerful way to solve this problem, as it enables the near sensing end of the system to have certain data processing capabilities. Compared to other proximity computing methods, pre sensing light computing has the advantages of high speed, high bandwidth, and low power consumption. However, currently the vast majority of optical neural networks require coherent lasers as light sources, with bulky and complex hardware systems that can only perform linear operations and lack interlayer nonlinear activation, which limits the application of pre sensing light computing in edge scenes.

Figure 1. Paradigm of Near Sensor Computing in Machine Vision Link

Professor Chen Hongwei's team from the Department of Electronic Engineering at Tsinghua University proposed a compact passive multilayer optical neural network (MONN) architecture, which consists of a passive mask and a quantum dot thin film, to complete multilayer optical calculations with interlayer nonlinear activation under incoherent light illumination. The optical length of this architecture is as short as 5 millimeters, which is 2 orders of magnitude smaller than existing lens based optical neural networks. Experimental results have shown that this multi-layer computing architecture outperforms linear single-layer computing in various visual tasks, and can transfer up to 95% of computations from the electrical domain to the optical domain. This architecture has the advantages of small size, low power consumption, and high practicality, and is expected to be deployed in mobile visual scenarios such as autonomous driving, intelligent manufacturing, and virtual reality in the future.

Figure 2. Multi layer pre sensing optical neural network architecture and interlayer nonlinear activation function measurement

Meanwhile, the absorption and emission spectra of CdSe quantum dots overlap within the wavelength range. By designing, the absorption and excitation spectra of the front and rear quantum dots can be aligned, enabling cascading and expansion of existing three-layer architectures to more layers. The MONN architecture can also be combined with other proximity computing paradigms to complete complex computing functions.

Recently, the related research results were published in Science Advances under the title "Pre sensor Computing with Compact Multi layer Optical Neural Network". The Department of Electronic Engineering at Tsinghua University is the first unit of the paper, Chen Hongwei is the corresponding author of the paper, and Huang Zheng, a doctoral student from the Department of Electronics in 2020, is the first author of the paper. The research has received support from the National Natural Science Foundation of China and the Beijing Municipal Science and Technology Commission.

Source: Opticsky

Gerelateerde aanbevelingen
  • German team develops and promotes laser technology for formable hybrid components

    Scientists from the Hanover Laser Center (LZH) in Germany are studying two laser based processes for producing load adapted hybrid solid components.From a transaction perspective, mixing semi-finished products can help save materials and production costs, but if the components that need to be replaced are made of expensive materials, these materials need to meet high requirements in future use, su...

    2023-08-16
    Bekijk vertaling
  • Scientists at Peking University invent ultra-thin optical crystals for next-generation laser technology

    BEIJING, Dec. 19 (Xinhua) -- A team of Chinese researchers used a novel theory to invent a new type of ultrathin optical crystal with high energy efficiency, laying the foundation for next-generation laser technology.This photo taken on Dec. 15, 2023 shows a Twist Boron Nitride (TBN) crystal placed on a piece of fused silica in Peking University, Beijing, capital of China. A team of Chinese rese...

    2023-12-20
    Bekijk vertaling
  • The University of Rochester has received nearly $18 million to build the world's highest power laser system

    After receiving a $14.9 million contract from the US Department of Defense (DOD) last month to study the pulse laser effect, the University of Rochester recently received nearly $18 million in funding from the National Science Foundation (NSF) for the key technology design and prototype of the EP-OPAL, also known as the OMEGA EP coupled optical parametric amplifier line (OPAL).EP-OPAL is a new fac...

    2023-09-28
    Bekijk vertaling
  • Ultrafast laser technology continues to reach new heights

    Ultra short pulse lasers, such as femtosecond lasers, are increasingly becoming easy-to-use plug and play devices suitable for a wide range of industrial and biomedical applications. Fifteen years ago, the volume of these lasers was still very large, requiring daily cleaning of optical components, regular maintenance of cooling water, and continuous optimization of laser parameters. Nowada...

    2023-11-06
    Bekijk vertaling
  • EOS and AMCM will open a new UK Additive Manufacturing Excellence Center

    The University of Wolverhampton (UK), along with global 3D printing leaders EOS and AMCM, will collaborate to establish a new Centre of Excellence (AM) for Additive Manufacturing in the UK. This partnership will provide cutting-edge technology from EOS and AMCM, and focus on developing advanced materials and processes for high demand applications in industries such as aerospace, automotive, aerosp...

    2024-04-15
    Bekijk vertaling