Nederlands

First time! Significant progress has been made in low repetition rate fully polarization maintaining nine cavity fiber lasers

353
2024-05-07 16:45:29
Bekijk vertaling

Recently, the research team of the Aerospace Laser Technology and System Department of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, reported for the first time a low repetition frequency full polarization maintaining 9-shaped cavity fiber laser at 915 nm. The relevant research results were published in Optics Express under the title "Low repetition rate 915 nm figure-9 ultrafast laser with all fiber structure".

Laser with a wavelength around 900 nm is highly favored in the field of optical measurement due to its high responsiveness on silicon-based detectors. The low repetition rate fiber laser in this band can effectively reduce distance ambiguity in Time of Flight (TOF), and has the characteristics of good beam quality, compact structure, and long-term stability, making it an ideal light source for space detection. However, due to the strong dispersion and nonlinear effects of single-mode fibers, it is difficult for lasers to achieve single pulse operation in long fiber cavities. Therefore, the repetition frequency of traditional mode-locked fiber lasers is usually limited to tens to hundreds of MHz.

In response to the above issues, researchers have proposed a low repetition rate fully polarized nine cavity fiber laser with a central wavelength of 915 nm. By designing and optimizing the laser structure, high-energy single pulse output was achieved at low repetition rates. The optimized seed was amplified in one stage to obtain a pulse output with a pulse width of 15.2 ps and a single pulse energy of 4.7 nJ at a repetition frequency of 3.1 MHz. The mode locking performance of the laser has been confirmed through long-term power and spectral stability tests. This compact and long-term reliable fiber laser is a promising light source for future space laser ranging.

This work was supported by the Youth Innovation Promotion Association of the Chinese Academy of Sciences, the National Natural Science Foundation of China, and the Shanghai Natural Science Foundation.

Figure 1. Experimental setup diagram of a 915 nm low repetition rate fully polarization maintaining nine cavity fiber laser

Figure 2. Long term stability testing of output power and spectrum, and output characteristics of pulses in frequency and time domains

Source: Yangtze River Delta Laser Alliance

Gerelateerde aanbevelingen
  • Research has found that inorganic perovskite materials are easy to prepare and process, making them suitable for manufacturing lasers

    According to research from Busan National University, inorganic perovskite materials are easy to prepare and process, making them suitable for manufacturing lasers.The perovskite of interest is CsPbBr3, which must form "nanosheets" within the specific structure invented by the Busan team to obtain sufficient laser gain.It is not that the laser has been achieved, as the research project aims to cha...

    2024-01-04
    Bekijk vertaling
  • Fraunhofer ISE develops a faster laser system for wafer processing

    By using a new type of laser, the processing speed of wafers can be 10 to 20 times faster than before. This is the result of a research project at the Fraunhofer Institute for Solar Systems in Germany.Researchers have developed a prototype that can use ultraviolet waves to carve the most intricate structures on silicon wafers. The new system concept enables solar cell manufacturers to perform lase...

    2023-12-23
    Bekijk vertaling
  • Laser Photonics Corporation sets high growth strategy for 2025

    Recently, laser cleaning equipment manufacturer Laser Photonics Corporation (LPC) announced its ambitious 2025 growth strategy, emphasizing innovation, strategic investment, and market expansion. LPC Executive Vice President John Armstrong stated:With a solid foundation laid in 2024, we will enter 2025 with clear momentum and a firm focus on growth. The progress we made last year - strengthening...

    01-20
    Bekijk vertaling
  • Researchers treated MXene electrodes with lasers to improve lithium-ion battery performance

    Researchers at King Abdullah University of Science and Technology (KAUST) in Saudi Arabia have found that laser scribing or creating nanodots on battery electrodes can improve their storage capacity and stability. The method can be applied to an alternative electrode material called MXene.Lithium-ion batteries have multiple drawbacks in a wide range of applications, and researchers around ...

    2023-08-04
    Bekijk vertaling
  • Overview of Inconel 939 Alloy Parts Developed by Additive Manufacturing Process

    The related paper was published in Heliyon under the title "A systematic review of Inconel 939 alloy parts development via additive manufacturing process".IN939 is a modern nickel based high-temperature alloy that can work continuously at high temperatures due to its excellent fatigue resistance, creep resistance, and corrosion resistance. The unique performance of IN939 is related to the composit...

    2024-12-10
    Bekijk vertaling