Nederlands

Credo launches the world's first 800G DSP for linear receiving optical devices, targeting ultra large scale and artificial intelligence data centers

371
2023-11-30 14:36:04
Bekijk vertaling

Credo Technology Group Holding Ltd announced today the launch of the industry's first Dove 800 850G digital signal processor IC, which has been optimized for linear receiving optical devices and is also known as semi retiming linear optical devices in the industry. In LRO transceivers or active optical cables, only the transmission path from the electrical input to the output of the optical path includes DSP for signal timing and equalization. Dove 850 is a unidirectional 8 x 112 Gb/s DSP designed specifically for this LRO architecture.

With the rapid growth of artificial intelligence deployment in large-scale data centers, high-speed optical transceivers and AOCs are crucial for connecting thousands of GPUs. Given the enormous volume of these optical components, improving energy efficiency is crucial. Dove 850 meets this requirement while achieving powerful system performance and additional benefits of cost reduction.

Chris Collins, Vice President of Sales and Optical Product Marketing at Credo, said, "Dove 850 can reduce DSP power consumption by up to 50%, optimize costs, and provide customers with easy-to-use, powerful, and interoperable solutions." Our chief transceiver and ultra large scale customers recognize the value of this solution, and we have delivered Dove 850 samples and evaluation boards to meet market demand. "

Transceiver suppliers can further optimize the module cost of Dove 850 by using various optical devices, including VCSEL, silicon photonics, EML, or thin film lithium niobate, depending on application requirements.

The Dove 850 based optical transceiver aims to alleviate the deployment burden on system operators by promoting IEEE compliant optical transmission signaling and eliminating manual, per port tuning, thereby addressing the inherent weaknesses of linear pluggable optical implementation. The result is a decrease in error rate, an increase in sensitivity, a reduction in performance changes, and an improvement in recovery ability for different switch ASICs, PCB wiring, optical components, and environmental conditions.

"Over the past year, LPO has been a hot topic as the industry is seeking ways to reduce data center power consumption. However, due to technological limitations such as interoperability, link accountability, and troubleshooting capabilities, customer enthusiasm has been suppressed, resulting in our prediction of LPO being less than 10% of the 800GbE market," said Scott Wilkinson, Chief Analyst for Optics at Cignal AI. Credo's Dove 850 is a semi retiming solution that addresses these limitations, consumes less power than traditional optical devices, and provides a clear path to 224G for 1.6Tb/s operation. This solution will greatly expand the market for low-power 800GbE solutions, far exceeding LPO.

Each channel of Dove 850 has an independent PLL to support branching applications, host interfaces that comply with OIF CEI-112G-MR standards, and numerous integrated diagnostic functions, which can accelerate product launch time and assist in system debugging.

Source: Laser Net

Gerelateerde aanbevelingen
  • UK to Build World's Largest Power Laser: Accelerating the Use of Nuclear Fusion and Promising to Obtain Clean Energy

    According to reports, British scientists will build the world's largest power laser. They hope that this £ 85 million (approximately $103 million) device can accelerate the use of nuclear fusion and potentially obtain clean energy, which is inexhaustible.According to the report, the "Vulcan" 20-20 laser will be built in Havel, Oxfordshire, and it will produce a laser brightness that is 24 t...

    2023-10-09
    Bekijk vertaling
  • Coherent's first global manufacturing center in India will focus on the development, production and service of lasers, optical networking components and systems

    Coherent, a global laser giant, has signed a tripartite cooperation agreement (MoU) with the Indian Institute of Technology Madras Research Park (IIT MRP) and Guidance Tamil Nadu Investment Promotion Centre.Coherent will establish its first global Manufacturing Centre (CoE) for laser applications at IIT Madras Research Park, which will focus on R&D, production and services for lasers, optical ...

    2023-09-07
    Bekijk vertaling
  • Creativity Falcon 2 laser cutting machine will be launched in Germany equipped with a new 60W laser head

    Starting from June 20th, The Creativity Falcon 2 laser cutting machine will also be launched in Germany, equipped with a new 60W laser head. With this ability, fully encapsulated equipment can now also be carved into steel. High power is achieved through twelve 5-watt laser diodes, whose beams are combined with each other. This will make it possible to cut 22mm thick lime wood and 30mm thick or...

    2024-05-29
    Bekijk vertaling
  • NSF funding for the world leading EP-OPAL laser multi mechanism design in Rochester

    The National Science Foundation (NSF) of the United States has awarded the University of Rochester nearly $18 million for three years to design and prototype key technologies for EP-OPAL, a new facility dedicated to studying the interaction between ultra-high intensity lasers and matter.After the design project is completed, the facility can be built at the Laser Energy Laboratory (LLE). This fund...

    2023-09-26
    Bekijk vertaling
  • NUBURU announces its latest strategic blueprint

    Following the announcement of the immediate termination of a $2 million stock exchange agreement and its partnership with HUMBL, high-power blue laser light source manufacturer NUBURU has once again announced its latest strategic blueprint. Through specific understanding, after this strategic update, NUBURU's business model will cover two collaborative key business lines, with a focus on defense a...

    04-17
    Bekijk vertaling