Nederlands

Shanghai Optical and Mechanical Institute has made progress in ultra-low threshold Rydberg state single mode polariton lasers based on symmetric engineering

785
2023-10-12 14:42:45
Bekijk vertaling

Recently, the research team of Dong Hongxing and Zhang Long from the Research Center of Infrared Optical Materials of the Chinese Academy of Sciences Shanghai Institute of Optics and Precision Mechanics, in cooperation with Huazhong University of Science and Technology, reported a new mechanism for generating dynamically tunable single-mode lasers from exciton polaritons with ultra-low thresholds, The relevant research results are published in Nano Letters under the title "Rydberg State Single Mode Polarion Lasing with Ultralow Threshold via Symmetry Engineering".

The implementation of single mode nano lasers with high energy efficiency and tunable bandwidth is crucial for numerous technological applications such as all optical information processing, optical encryption, super-resolution biomedical imaging, and miniaturized intelligent display. The current strategies for obtaining single-mode lasers still have limitations.

In addition, the current control methods for emission wavelength are essentially static, and new mechanisms that can generate dynamically tunable single-mode lasers are urgently needed to be explored. Exciton polarized polaritons have both photon and exciton properties and have received widespread attention in recent years. Compared with traditional lasers, polarized polariton lasers do not require population inversion and can achieve mode tuning through quantized exciton polarized polariton states, making them an ideal platform for studying dynamically tuned ultra-low threshold lasers.

Researchers have reported the implementation of tunable single mode polarized polariton lasers from highly excited Rydberg states through symmetry engineering. By breaking the symmetry of polariton wave functions through potential traps and controlling the spatial overlap between gain regions and intrinsic modes, reversible and dynamic single mode polariton lasers can be generated from quantized polariton states. By increasing the asymmetry of the potential well, single mode lasers can be achieved even in highly excited states with a main quantum number of N=14.

In addition, due to the excellent overlap of reservoir intrinsic modes and effective spatial constraints, the laser threshold can be reduced by 6 orders of magnitude compared to traditional lasers. The mechanism elucidated by the research results does not depend on any specific material and is applicable to various polarization polariton systems, opening up a new path for the development of dynamically tunable threshold free polarization polariton lasers.

This work has been supported by projects such as the National Natural Science Foundation of China and the Shanghai Youth Top Talent Program.

Figure 1 (a) Schematic diagram of quantized polarized polariton states in a symmetric well; (b) The simulated PL spectrum corresponds to the experimental configuration shown in a; (c) Quantized polarized polariton states in asymmetric wells; (d) The simulated PL spectrum corresponds to the experimental configuration shown in c; (e) SEM images of typical ZnO microrods; (f) 1.27 radius μ Angle resolved PL images of typical ZnO microrods with m. (g) Spatial resolved PL images of polaritons confined in traps.

Figure 2 (a-d) shows the pump position dependence of spatially resolved PL images in a symmetric well. Given in each image Δ X represents the displacement of the excited laser spot from the center of the trap; (e) The spectra corresponding to the images shown in a-d; The pump position dependence of spatially resolved PL images in asymmetric wells (f-i). Δ X represents the displacement between the pumping laser spot and the opposite end face of the ground state polarization wavelet function. Pumping power: 1.25 Pth; (j) The spectra corresponding to the images shown in f-1.

Figure 3 (a-d) selectively pumped spatially resolved PL images of highly asymmetric wells at N=2, 3, 7, and 14 excited states, with a pumping power of 1.35 Pth; (e) The spatially resolved PL images of highly asymmetric wells were selectively pumped at N=2, 3, 7, and 14 excited states, with a pumping power of 1.35 Pth.

Source: OFweek

Gerelateerde aanbevelingen
  • Three core processes of laser soldering support the development of PCB electronics industry

    In the field of modern electronic manufacturing, PCB (printed circuit board) serves as the carrier of electronic components. In its manufacturing process, laser soldering technology has become a key link in PCB electronic manufacturing due to its advantages of high precision, high efficiency, and low thermal impact. This article will explore the application of laser soldering technology and its ma...

    2024-04-15
    Bekijk vertaling
  • American scientists use light technology to control hypersonic jet engines

    According to the website "interesting engineering" on July 29th, a new study funded by the National Aeronautics and Space Administration (NASA) has revealed for the first time that the airflow in supersonic combustion jet engines can be controlled through optical sensors. This study was conducted by researchers from the School of Engineering and Applied Sciences at the University of Virginia.When ...

    2024-07-31
    Bekijk vertaling
  • Nanchang University research progresses in acoustic resolution photoacoustic microimaging enhancement

    As a promising imaging modality that combines the high spatial resolution of optical imaging and the deep tissue penetration ability of ultrasound imaging, photoacoustic microscopy (PAM) has attracted a lot of attention in the field of biomedical research, and has a wide range of applications in many fields, such as tumor detection, dermatology, and vascular morphology assessment. Depending on the...

    2024-09-18
    Bekijk vertaling
  • Innovative nanoparticle analysis: achieving breakthrough 3D imaging using X-ray lasers

    The latest progress in X-ray laser technology has opened up a new era of nanoscale exploration, bringing unprecedented opportunities for materials science and nanotechnology. Researchers have developed a novel imaging technique that can directly visualize separated nanosamples in free flight, capturing their complex structures with stunning details. This breakthrough method relies on single cohere...

    2024-03-05
    Bekijk vertaling
  • Laser printing on fallen leaves can produce sensors for medical and laboratory use

    The manufacturing of sensors through 3D printing combines speed, design freedom, and the possibility of using waste as a substrate. In the circular economy model, various results have been achieved, and typically discarded residues are used as low-cost resources. A research team in Brazil has proposed a highly creative solution that involves printing electrochemical sensors on fallen leaves. The t...

    2024-05-16
    Bekijk vertaling