chanelink logo
CHANELINK
Nederlands

During power on and reset, the X axis stopped after touching the limit switch, while the Y axis was still running slowly at the origin.

Categorieën:
Ruida
Tags:
736
1
Bekijk vertaling
2022-12-30

During power on and reset, the X axis stopped after touching the limit switch, while the Y axis was still running slowly at the origin.
C

    • Marshall

      2023-01-03
      ① The polarity of the Y axis is reversed. Reset the polarity;
② The limit switch is broken and needs to be repaired.
        Bekijk vertaling
        Antwoord
      Relevante aanbevelingen
      Verzamel
      Rapporteren