The panel did not prompt for hard limit protection when Z-axis reached the hard limit switch.
Categorieën:
Ruida
434
1
0
2022-12-12
C
Aaron
2022-12-13① Check the hard limit switch and circuit ② Check whether the port wiring is correct. ③ Check whether the hard limit alarm is set in the manufacturer's parameters.
0Antwoord
Relevante aanbevelingen
-
Nest
2 Antwoorden2024-05-07 -
Some confusion about the RDC6445G controller
2 Antwoorden2023-10-02
