Lightburn and Ruida 6445G

jonnyfantatop

Categorieën:

Ruida

Bekijk vertaling

08-15

when I start or send files from Lightburn to laser machine the head follows the tool path but no laser

connected by Ethernet

connection is good, reads machine seetings, saves steetings, modify backup etc etc

Lightburn 1.7.08 trial PC win 7 - maybe too old for 6445g ??

Anyone know if Lightburn will work on the Ruida 6445g conttroller?

blue sea

08-16

Hello! The Lightburn software is not compatible with our products, and the trial version does not confirm whether it can be used. Please contact the software developer to confirm. Please use our proprietary software RDWorksV8 for use. Download address: https://www.rdacs.com/en/download?type=software.

Bekijk vertaling

Antwoord

Relevante aanbevelingen

Volgen

Verzamel

Rapporteren

Lightburn and Ruida 6445G

When opening the software, it prompts "PCI card reset failed!" Or "Reset PCI card failed"

When the RDC6442S is operated, the graphics super format is automatically divided. The laser first cuts in the X direction and then does not emit light. The U axis starts to feed materials to a certai

It is always impossible to cut through. Finally, it has to be cut twice, and the effect is not good. How to adjust it?

When operating RDC6442S, an error occurred after the automatic blocking of the graphic super format was selected.

What is the possible reason for the skew of graphics and characters when cutting?