The semiconductor laser subsystem can display power, current, temperature, pulse width, frequency, etc. through the LCD panel, and can be adjusted by the panel or remotely controlled by the RS232 serial port. The system has a high degree of integration and is easy to operate, and is mainly used in scientific research, system integration and other f...
4 dagen geleden34001064nm TO5激光二极管 3W 激光传感器品牌:SEALAND型号：XL-TO5-E1064M-3W 应用：激光投影 仪器仪表 生物医学应用 全息术 光纤激光器 高速光电探测器 医疗器械和设备 宽范围光谱
06-095600BWT Thunder series fiber lasers have good beam quality, which makes them perfect choices for precision processing. The two operation modes, CW and modulation, minimize heat-affected zone. Reliable performance, modular and all-fiber design, and robust case enclosing all optical and electronic components ensure that they can be used under strict indu...
06-049201BWT Lightning series fiber lasers have good beam quality, and the beam can be focused close to the diffraction limit, which makes them perfect choices for precision processing. The two operation modes, CW and modulation, minimize heat-affected zone. Reliable performance, modular and all-fiber design, and robust case enclosing all optical and electr...
05-2720900GZTECH QCW products, single-mode and multi-mode optional, suitable for precision welding and cutting applications of metals/ceramics and other materialsPower:75W 150W 300W 450W 600WOverviewGZTECH QCW lasers support simultaneous operation in both continuous and high peak power pulsed modes and can handle processing tasks that previously required ...
05-1528501BWT Thunder series fiber lasers have good beam quality, which makes them perfect choices for precision processing. The two operation modes, CW and modulation, minimize heat-affected zone. Reliable performance, modular and all-fiber design, and robust case enclosing all optical and electronic components ensure that they can be used under strict indu...
05-10257001. Unstable laser outputUnstable laser output is one of the common faults in fiber lasers, which may lead to unstable processing quality or even processing failure.Possible reasons:(1) Laser lens contamination(2) Poor heat dissipation of laser(3) The laser power supply is unstableresolvent:(1) Timely clean the lenses inside the laser(2) Check if th...
2024-07-2338710Hi, I'm using the Ruida RDC6563 controller for a fiber laser cnc machine with the specifications of a BM110 laser head with auto focus servo. everything is running normally and have done a metal plate cutting test. but there is one issue, the autofocus function on the parameter layer does not work. but servo A axis runs normally on manual jo...
2023-02-1861271Order/Invoice ID: Available upon requestIssue Product Name: Cloudray JPT M7 60W MOPA Fiber LaserIssue Description: No included drivers shipped with this unit, nor downloaded from the Cloudray site will install correctly in Win 10 64 bit machine. I have followed the guide many times. All drivers for BJJCZ FBLI-B-LV4 controller error as Code 52 / Uns...
2023-02-2847010Researchers at Friedrich Schiller University in Germany have developed a compact extreme ultraviolet (EUV) laser module. The module can be used to produce special EUV light, which not only breaks the limitation of previous EUV experiments being conducted in large, expensive research facilities, but also makes them more cost effective.Robert...
2023-03-2845400I have a project where I have to burn off black paint from a plexiglass. (a transparent scale for a tank with liquid) I got a sheet of transparent, fully clear, not matte, plexiglass (acrylic glass) I spray painted it with black paint (have two choices, from a spray can, of can use an airbrush and paint it with water based acrylic paint, same resul...
2023-03-1046210All, Any pitfalls I should be worried about with fiber lasers? I’m currently running an 80 watt CO2 Omtech and have had good luck with it. Producing some really good stuff. Now, I want to get into metal engraving, mainly firearms. As a backup, do they work well for tumblers? Anyone use them for tumblers as a primary?
2023-02-22614202D has 2 true axis of X Y axis moving.2.5D has a 3rd axis but its of very limited utility. It uses the electric Z axis to realize the function of moving up and down3D has 3 true and relatively equal axis of movement/control in something resembling “volume”.2.5D working principleThe 2.5D fiber laser with 2D galvo head,which have...
2023-02-1845100In addition to the appearance structural parts of the foundation, the laser water chiller system mainly includes its internal refrigeration system and control system. The refrigeration system is generally composed of four parts: compressor, condenser, throttle valve, evaporator, etc; The control system includes the control of the compressor, thrott...
2023-02-1461600From the successful development of the first laser to the present, the laser is developing in the direction of high power and diversity. What is the future development trend of laser water chiller as a cooling equipment for laser?1、 Diversification.From the initial cooling of CO2, YAG and other traditional lasers to the current cooling of f...
2023-02-1451100
- Geen gegevens
Nederlands
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski