한국어

Micro laser opens the door to chip size sensors

233
2024-03-13 10:40:09
번역 보기

The new device is a frequency comb - a special type of laser that can generate multiple wavelengths of light, each with a fixed frequency interval. On the spectrogram, it looks a bit like the teeth of a comb. In approximately a quarter century since their first development, these "cursor rulers" have completely transformed various high-precision measurements from timing to molecular detection. In addition, each line of the comb can be isolated and has characteristics such as amplitude modulation to transmit data through optical fibers.

However, frequency combs typically require bulky, expensive, and power consuming equipment. This greatly limits their use in laboratory environments.

Now, scientists at Stanford University have adopted two different methods to create microchip level frequency combs. A strategy called optical parametric oscillation involves reflecting a laser beam within a crystal to organize the light itself into coherent and stable wave pulses. Another method is called phase modulation, which sends the laser into the cavity and applies radio frequency signals to control the phase of the light, generating frequency repetition for the comb. However, both strategies have drawbacks, such as low energy efficiency and limited ability to adjust optical parameters.

To overcome these challenges, scientists experimented with a material called thin film lithium niobate, which has many advantages over the industry standard material silicon. Two of these characteristics include how light of various wavelengths passes through it, and how it allows beams of different wavelengths to interact to produce new wavelengths.

This new material supports both optical parametric amplification and phase modulation in a single cavity. The resulting "micro comb" size is only 1 x 10 millimeters. Researchers say that such a compact size indicates that it can be used in mobile phones or smaller personal devices. They added that it can also be easily manufactured in traditional microchip factories.

"The most surprising aspect of this comb is how it performs in terms of bandwidth, spectrum, and efficiency," said Amir Safavi Noeini, Associate Professor of Applied Physics at Stanford University.

The new micro comb did not generate light pulses as expected by the researchers, but unexpectedly produced continuous output. Other combs waste power between pulses. Therefore, scientists can reduce the input power required by the device by about an order of magnitude.
The new device converts the light pumped into the cavity into a comb with an efficiency of over 93%. It can generate 200 comb lines with intervals of approximately 5.8 GHz at frequencies exceeding 1 THz. It has been proven that it is highly adjustable by simply adjusting the wireless signal applied to it. Safavi Noeini said that all of these features make it highly attractive for emerging ideas of chip level sensors that require detecting a wide range of spectra.

In addition, the device produces a flat comb, which means that the strength of comb lines with frequencies far from the center will not weaken. This flat feature helps to improve accuracy and makes micro combs available for a wider range of measurement applications.
Scientists have pointed out that the spacing between comb lines can reach 50 to 100 GHz, and the device may operate under blue to mid infrared light. This indicates that micro combs can be used for applications such as medical diagnosis, fiber optic telecommunications, LiDAR, and spectroscopy.

"We have recently started researching very lightweight, low-cost, and low-power greenhouse gas detection applications," said Safavi Noeini. Other fields such as biosensing are also very interesting.
Safavi Noeini said that in the future, scientists hope to improve the performance of devices and expand their bandwidth and operating wavelength range.
Scientists detailed their findings in the journal Nature on March 6th.

Source: Laser Net

관련 추천
  • 150 kW Ultra High Power Laser Sensor Released

    Recently, MKS announced the launch of a brand new Ophir ® A 150 kW ultra-high power laser sensor designed specifically for measuring ultra-high power levels up to 150 kW. This sensor has excellent accuracy and reliability, suitable for industrial and defense fields.This water-cooled calorimeter has a working wavelength range of 900-1100 nm and can measure power from 10 kW to 150 kW. Its extremely ...

    2024-12-27
    번역 보기
  • Laser surface treatment of Ti6Al4V alloy: finite element prediction of melt pool morphology and microstructure evolution

    Researchers from the University of Calabria, University of Salento, and LUM University in Italy have reported on the progress of finite element prediction research on laser surface treatment of Ti6Al4V alloy: melt pool morphology and microstructure evolution. The related research was published in The International Journal of Advanced Manufacturing Technology under the title "Laser surface treatmen...

    04-10
    번역 보기
  • Uncovering the Secrets of Nature: A New Generation of X-ray Lasers Reveals the Mystery of Atoms

    As a breakthrough leap in scientific exploration, the new generation of powerful X-ray lasers is now targeting the fastest and most basic processes in nature. Their mission: to uncover the complex atomic arrangement that drives these phenomena, providing unprecedented insights into chemical reactions, electronic behavior in materials, and the mysteries of the natural world.Unlocking the precise me...

    2023-09-25
    번역 보기
  • Bodor Laser: Laser Cutters Rank First in Global Sales for Six Consecutive Years

    On February 27, at Bodor Laser's global headquarters base in Licheng District, Jinan City, three automated production lines were operating at full capacity, struggling to meet the overwhelming demand. Lu Guohao, Secretary of the Board and Director of the President's Office at Bodor Laser, revealed that the company's laser cutter shipments exceeded 8,000 units in 2024, securing the top spot in glob...

    03-10
    번역 보기
  • 国内自主研发首套碳化硅晶锭激光剥离设备投产

           近日,从江苏通用半导体有限公司传来消息,由该公司自主研发的国内首套的8英寸碳化硅晶锭激光全自动剥离设备正式交付碳化硅衬底生产领域头部企业广州南砂晶圆半导体技术有限公司,并投入生产。 图:8英寸SiC晶锭激光全自动剥离设备       该设备可实现6英寸和8英寸碳化硅晶锭的全自动分片,包含晶锭上料、晶锭研磨、激光切割、晶片分离和晶片收集,一举填补了国内碳化硅晶锭激光剥离设备领域研发、制造的市场空白,突破了国外的技术封锁,将极大地提升我国碳化硅芯片产业的自主化、产业化水平。       该设备年可剥离碳化硅衬底20000片,实现良率95%以上,与传统的线切割工艺相比,大幅降低了产品损耗,而设备售价仅仅是国外同类产品的1/3。       近年来,碳化硅功率器件在大功率半导体市场中所占的份额不断提高,并被广泛应用于新能源汽车、城市轨道交通、风力发电、高速移动、物联网等一系列领域...

    2024-08-26
    번역 보기