Lightburn and Ruida 6445G

jonnyfantatop

카테고리:

Ruida

번역 보기

08-15

when I start or send files from Lightburn to laser machine the head follows the tool path but no laser

connected by Ethernet

connection is good, reads machine seetings, saves steetings, modify backup etc etc

Lightburn 1.7.08 trial PC win 7 - maybe too old for 6445g ??

Anyone know if Lightburn will work on the Ruida 6445g conttroller?

blue sea

08-16

Hello! The Lightburn software is not compatible with our products, and the trial version does not confirm whether it can be used. Please contact the software developer to confirm. Please use our proprietary software RDWorksV8 for use. Download address: https://www.rdacs.com/en/download?type=software.

번역 보기

답글

Lightburn and Ruida 6445G

When the RDC6442S is operated, the graphics super format is automatically divided. The laser first cuts in the X direction and then does not emit light. The U axis starts to feed materials to a certai

RDD6584V-Net - Engraving issue using Milling

The RDC6442 board fails to connect the device in the processing preview when downloading graphics to the back panel of the motherboard

When using the brush function to rotate the Z-axis instead of the U-axis for machining, there is always a gap reset action

The servo motor only moves in one direction