I am just learning and new, still on the trial package. In the lightburn program and I am wondering why the mirror button doesn’t show up to use anywhere, not on the tool bar and not down the Arrange section. Maybe I have to turn it on but have no idea and have search the net over and over but nothing about the missing button. I know about how to c...

berainlb

02-08

828

5

0

Hi everyone i just started to experiment with puzzles on my laser and have seen almost all vids on the topic on Youtube Lots of good information.BUT our “friend” called Kerf is an acurring issue. My experience now is that its two solutions to deal with the kerf. If you are going to engrave your design directly on the puzzle, you can just separate e...

Andre J

02-07

738

6

0

China hydraulic sheet rolling machine manufacturer　　Once there is a deviation in the use of the hydraulic sheet rolling machine,it will endanger the production and processing products,resulting in the inability to use the products,as well as endangering work efficiency and product costs.So how to reduce or eliminate the application deviation of th...

qshbcn

02-12

557

1

1

Three Roller Type Sheet Metal Rolling Cone MachineWe are a professional manufacturer of Three Roller Type Sheet Metal Rolling Cone Machine with over 10 years of industry experience. Today, we would like to introduce to you: Three Roller Type Sheet Metal Rolling Cone Machine is a mechanical processing equipment used to roll metal sheets into var...

qshbcn

2024-12-29

613

3

2

plate rolling machine factoryWelcome to my plate rolling machine factory, where you can find the high-quality plate rolling machine you need at a cheap price, waiting for your consultation.Welcome to experience the excellent performance of our sheet metal plate rolling machine and special metal plate rolling machine, which are designed to reduce em...

qshbcn

2024-12-29

647

1

1

During the use of laser rust removal machines, various common problems may be encountered, which can be summarized as follows:1、 Optical path and laser source issuesFiber aging or damage:Phenomenon: After a period of use, optical fibers are prone to aging, leading to a decrease in power and signal attenuation, which affects the rust removal effec...

Kevin

02-12

598

0

0

1、 Material selectionThe material melted by laser should have a high melting point and thermal conductivity in order to better withstand the heat of the laser beam. Meanwhile, the chemical composition and crystal structure of the material can also affect the formation of cracks. Therefore, when selecting materials, these factors should be considere...

Nugent

02-11

737

0

1

In modern industry, laser cleaning is rapidly emerging as a superior surface treatment technology. Especially with the application of fiber lasers, the popularization and improvement of this technology have been achieved. Fiber lasers have become the best choice for laser cleaning light sources due to their high reliability, stability, and flexibil...

Marshall

02-10

699

0

0

I have a 5W 12V AtomStack, I want to change the laser for a 20W 24V one. What should I implement to be able to adapt it to the new laser module?

Cruise Wang

02-05

612

3

0

Hi, I just purchased “Longer” laser, my problem is when it homes it doest stop but keeps on vibrating off the side bars, I can’t see any sensors, I’m thinking it may be a setting I need to open.

Durell

02-06

764

2

0

The four major precautions for laser welding of aluminum alloys: Laser welding machines can indeed provide high energy density and welding speed when welding aluminum alloys, making the welding process more efficient. However, the high reflectivity and low heat absorption of aluminum alloys also pose significant challenges for welding. To avoid pot...

John Trant

02-05

609

0

0

I am engraving a square box-shaped ruler. The lines engrave lighter on the X-Axis than they do on the Y-Axis. They are all on the same layer with the same settings.Why does this happen and how do I fix it?

LWE

01-21

807

2

1

After a few cuts my brand new laser (Atomstack A10 pro V2 Black) suddenly did not ray (burning / firing), at the same time It is moving properly, fan works, two leds at laser module works (pwm is blue, power is orange).Such bad behavior exists both: under WIFI via Atom Stack Mobile app and USB control via LightBurn.I checked similar topics, and my ...

Hiroko

01-14

830

8

0

1. When the vertical light is incorrect, adjust the vertical light and if necessary, readjust the light path. 2. If the focal length is not adjusted properly, please refocus.3. Voltage instability, low voltage, and low laser current. You need to replace the voltage regulator with a larger one and increase the laser current output.4. If the lig...

Vasili

01-22

854

1

0

To achieve deep marking, we can adjust the parameters of the laser marking machine through the following methods:1. Adjust the focal lengthReduce the focal length to the minimum to ensure that the laser beam can be accurately focused on the surface of the material, thereby achieving the goal of deep marking.2. Adjust the laser powerLaser power i...

Liam

01-22

722

0

0