The characteristics of such devices as motors have a great impact on their operation effect and functional performance. Stepping motors have excellent performance in operation and play an advantageous and distinctive role because of the following characteristics:Feature 1: The stepper motor must be driven before it can operate, and the drive model ...
2023-02-031K00Micromotor typeMicromotors are divided into 13 categories, including DC motors, AC motors, synchro motors, stepper motors, rotary transformers, shaft angle encoders, AC and DC dual-purpose motors, tachogenerators, inductosyn, linear motors, piezoelectric motors, motor sets and other special motors.1. Brushless DC motorIt is the fastest grow...
2023-02-031K00For the drive belt pulley, the timing belt pulley is very important. Because of the addition and existence of the timing belt pulley, the drive belt can operate normally. The synchronous pulley is an integral part of the drive belt system. Most of the machinery driven by belt is small wheel with big wheel. This is because the rotating speed ...
2023-02-031.1K00(1) For high-speed, high-power and long-term working conditions, the transmission system with high bearing capacity, stable transmission and high transmission efficiency should be selected.(2) In the case of low speed, medium and small power and high transmission ratio, multiple schemes such as single-stage worm drive, multi-stage gear driv...
2023-02-0396200Once powered on, the cutting head will always move upward, and will not stop. Switch to the manual state, and the motor can be controlled to move, and then switch to the automatic mode, and always move upward.
2023-01-101.2K10The cutting head does not lift up and down, but the motor has sound.
2023-01-101K10After normal connection, press the auto-focus button, and the cutting head will move upward all the time.
2023-01-101.1K10After cutting, it is found that the graphics in the software and the actual graphics are reversed from left to right or up to down.
2023-01-091.1K106563F moves manually on the panel according to Z-axis, and the cutting head does not move.
2023-01-051.1K20Will laser cutting be slow in winter？
2023-01-0989210Laser is a major invention in the 20th century and is known as "the fastest knife", "the most accurate ruler" and "the brightest light". After entering the 21st century, with the continuous development of technology, laser has gradually penetrated into all aspects of industrial production, and has a close relationship with us. Among them, laser mar...
2023-02-021.1K00Due to different factors such as structural form, material and heat treatment, operating environment and conditions, the failure forms of gears are also different. Common gear failures include the following forms.1 Gear failure form and preventive measures1) Tooth surface fatigue (pitting, peeling)Cause and phenomenon:It is mainly due to th...
2023-02-021.2K00The failures caused by ball screw are various and have no fixed mode. Some faults are gradual faults, which need a development process and become more and more serious with the increase of service time; Sometimes it is a sudden failure, usually without obvious symptoms, but it occurs suddenly. This kind of failure is caused by various adverse facto...
2023-02-021.1K00As the power source of electrical appliances and various mechanical equipment, the motor plays a key role. The motor mainly converts electrical energy into mechanical energy, greatly improving the operation and working efficiency of various tools. In recent years, servo motor is a popular product among motors, which is mainly used in various contro...
2023-02-021.1K00The reducer is a key part of the industrial robot, accounting for about 32% to 37% of the production cost of the entire industrial robot. With the increase in the output of industrial robots, the demand for speed reducers will also increase rapidly. It usually needs to use four to six reducers, mainly RV reducers, while harmonic reducers are used l...
2023-02-0195800
- 데이터 없음
한국어
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski