Get buffer message after pressing the start button

How to troubleshoot the low condensation pressure of the laser chiller?

How to troubleshoot the high condensation pressure of the laser chiller?

What are the common faults of refrigeration compressors in laser chillers?

Hello, I just upgrade my software to 1.4.01 and now my machine never ends a cut as get frozen on M2 command. The progress bar says busy and the timer keeps counting. If I press the stop button manuall

Analysis and Solution of Frosting on the Compressor of Laser Chiller

The advantages and disadvantages of several transmission modes commonly used in air compressors

How to prevent the compressor failure of industrial chiller?

Ultrafast fiber laser technology 35 hollow fiber compression produces a nanofocal less periodic pulse in the 1.9μm band

Which control mode is generally used for servo press

After normal connection, press the auto-focus button, and the cutting head will move upward all the time.

Switch to the manual state, press the Z+and Z - buttons on the operation panel, and the Z-axis motor will not move

When pressing Z - or Z+for a longer time (about 3-4S), the Z axis will go down or up all the time, and it is normal to press Z - or Z+for a shorter time.

When working, there is light. Press the Spot button and there is no light

Press Z-axis to move manually on the panel, and the cutting head does not move

Start up and press the limit switch all the time

Press the test key ".", the cutting head is in the following state, but the jitter is large.

RDC6332M, when it can follow up, press the auto focus button, the laser head starts to descend, touches the iron plate, and then rises to the reference focus position, and then stops, without lifting