日本語

Tsinghua University develops efficient and stable perovskite quantum dot deep red light devices

640
2025-03-18 14:02:42
翻訳を見る

Semiconductor quantum dots have the advantages of high quantum yield, narrow emission spectrum, and compatibility with solution processes. They have shown broad application prospects and enormous economic value in the field of optoelectronic materials and devices, and related research has won the Nobel Prize in Chemistry in 2023.

Compared with traditional II-VI and III-V quantum dots (such as CdSe, CdS, InP, etc.), perovskite quantum dots have unique advantages such as low cost, simple synthesis process, and continuously tunable spectra, and have attracted much attention in recent years. The external quantum efficiency of light-emitting devices based on perovskite quantum dots has been improved to over 20%, reaching the threshold for commercial applications. However, due to the poor stability of perovskite quantum dots, the operating life of light-emitting devices is only tens or hundreds of hours, which hinders their further industrialization.

Perovskite quantum dots require ligands to bind to their surface in order to maintain colloidal stability. However, during the growth, purification, film formation, and storage of perovskite quantum dots, highly dynamic and unstable ligands on the surface are prone to detachment, resulting in insufficient coordination of surface atoms, an increase in unsaturated and dangling bonds, and non coordinated atoms on the surface easily binding to other atoms, leading to aggregation or Oswald ripening of perovskite quantum dots, producing various defects and further affecting their luminescence performance and stability.

Recently, the team led by Ma Dongxin from the Department of Chemistry at Tsinghua University proposed a molecular induced quantum dot maturation control strategy, achieving efficient and stable perovskite quantum dot deep red light devices. The team has designed a series of bidentate organic small molecules with small size and molecular flexibility, which can adhere to the surface of perovskite quantum dots by twisting their own structure, interact with mismatched Pb2+, maintain a stable surface state, suppress the adverse aging and aggregation phenomena of perovskite quantum dots, reduce the density of surface defect states, and improve quantum yield.


Figure 1. Schematic diagram of molecular induced quantum dot maturation control strategy


The team has constructed a deep red light device based on high-performance perovskite quantum dots, with a luminescence peak at 686nm and an external quantum efficiency of up to 26.0%. The device exhibits excellent operational stability, with a half-life of 310 minutes at a constant high current density of 13.3mA cm-2, and a half-life of up to 10587 hours at an initial radiance of 190mWSr-1m-2. In addition, this perovskite quantum dot solution exhibits excellent storability, with external quantum efficiencies of 21.7% and 20.3% for devices constructed from the solution after one and three months of storage, respectively.

The above results indicate that the molecular induced quantum dot maturation control strategy proposed in the paper can effectively improve the efficiency and stability of perovskite quantum dot light-emitting devices, making them practical and promising in high-definition displays and biomedical treatments.


Figure 2. Optoelectronic properties of perovskite quantum dot light-emitting devices

 


Figure 3. Stability of perovskite quantum dot light-emitting devices


The related research results, titled "Molecular Induced Ripening Control in Perovskite Quantum Dots for Efficient and Stable Light Emitting Diodes", were published on March 14th in Science Advances.

Chen Jiawei, a postdoctoral fellow in the Department of Chemistry at Tsinghua University, Chen Shulin, an associate professor at the School of Semiconductors (School of Integrated Circuits) at Hunan University, and Liu Xiangyu, a doctoral student in the Department of Chemistry at Tsinghua University, are the co first authors of the paper. Associate Professor Ma Dongxin from the Department of Chemistry at Tsinghua University is the corresponding author of the paper, and the Department of Chemistry at Tsinghua University is the first communication unit. The research has received support from the National Natural Science Foundation of China's Youth Fund, Tsinghua University's Solid Science Program, the Chinese Postdoctoral Program, the Chinese Postdoctoral Special Fund, the National Postdoctoral Researcher Program, and the Tsinghua University's "Water and Wood Scholars" Program.

Source: opticsky

関連のおすすめ
  • Lumibird, a well-known French optoelectronics company, increased its lidar production capacity by 16% year-on-year and was boosted by strong market demand

    On July 24, Lumibird, a well-known French optoelectronics company, released its latest semi-annual report. In the first half of the year, Lumibird's revenues were 97.2 million euros, up 16 percent from the same period last year. Of this, the Optoelectronics division contributed 45.9 million euros and the remaining 51.3 million euros came from its medical division. In the second quarter (Q2) ended ...

    2023-08-04
    翻訳を見る
  • Artificial intelligence accelerates the process design of 3D printing of metal alloys

    In order to successfully 3D print metal parts to meet the strict specifications required by many industries, it is necessary to optimize process parameters, including printing speed, laser power, and layer thickness of deposited materials.However, in order to develop additive manufacturing process diagrams that ensure these optimal results, researchers have to rely on traditional methods, such as ...

    2024-02-27
    翻訳を見る
  • 3D printed chocolate: a delicious fusion of innovation and sustainable development

    In the era of sustainable development and cutting-edge technology, the integration of 3D printing and culinary art is not only an innovation, but also a proof of human creativity. Imagine in such a world, your desserts are not just coming out of the kitchen, but carefully designed and printed layer by layer. This is not a glimpse of the distant future, but the reality of today, as developers have ...

    2024-02-19
    翻訳を見る
  • Dazu Photonics launched the third generation of high power fiber laser successfully increased the product power to 50kW

    In recent years, with the vigorous development of new energy and other industries, the improvement of environmental awareness and the increasing demand for new applications, the demand for fiber lasers in intelligent manufacturing is increasing, and the demand for power is also increasing, and high-power fiber lasers can significantly improve production efficiency and are widely sought after by th...

    2023-09-02
    翻訳を見る
  • The UK government plans £ 10.5 million to support laser wire feeding

    On the first day of the 2025 Paris Air Show, the UK government announced a £ 250 million investment to support sustainable aerospace programs, with £ 48.5 million earmarked for funding additive manufacturing projects led by Airbus and GKN Aerospace. Among them, £ 10.5 million will be injected into the GKN Integrated System Level Aerospace Structure Assembly (ISLAA) program, with the aim of utilizi...

    06-23
    翻訳を見る