日本語

The role of PTFE in laser processing

195
2024-07-26 11:42:10
翻訳を見る

Polytetrafluoroethylene (PTFE) has improved the efficiency and repeatability of nanosecond and picosecond laser processing technologies used in microelectronics and display glass manufacturing.

 



In the field of precision manufacturing, the demand for efficient and repeatable processes is crucial. The laser structure of glass and laser ablation of silicon substrates are key areas where precision plays an important role.

These processes require meticulous consistency and stability to achieve the expected results. Polytetrafluoroethylene (PTFE), especially the glass filled PTFE G400 variant, has become an indispensable material for supporting substrates in laser processing.

Understand PTFE and its properties
Polytetrafluoroethylene (PTFE), commonly known as Teflon, is a fluorinated polymer known for its excellent chemical resistance, low friction coefficient, and high temperature stability. These characteristics make PTFE an ideal choice for various industrial applications (see Figure 1). When PTFE is reinforced with fillers such as glass fiber, bronze, carbon fiber, or fused silica, it gains additional mechanical strength and dimensional stability.

Characteristics of glass filled polytetrafluoroethylene
Glass filled PTFE G400 is a special variant that incorporates glass fibers into the PTFE matrix to enhance its strength and stability. Due to the following four key characteristics, this composite material is particularly suitable for supporting glass and silicon substrates during laser processing:

Mechanical strength and stability. The addition of glass fiber greatly improves its mechanical strength. This enhancement ensures that the material can support the substrate without deformation and maintain the precise alignment required for laser processing.

High temperature resistance. Laser processing, especially nanosecond and picosecond laser technology, generates a large amount of heat during focusing. The high temperature resistance of the material ensures its stability and non degradation under the general average and peak power conditions of ultra short pulse laser processing.

Chemical inertness. PTFE has inherent chemical inertness, which means it does not react with any residues generated during substrate or laser processing. This characteristic is crucial for maintaining the integrity and cleanliness of the substrate.

Low friction coefficient. The low friction coefficient of the material allows for smooth handling and positioning of the substrate, thereby minimizing the risk of damage during the setup and processing stages.

Enhance visibility and alignment
One of the prominent features of polytetrafluoroethylene is its pseudo bright white appearance. It provides a sharp contrast between the substrate and the background, greatly improving the visibility of machine vision inspection and calibration stages. In laser processing, precise alignment of the substrate is the key to ensuring that the laser beam interacts with the material at the correct position and angle.

The high contrast it provides enables operators to quickly and effectively achieve precise manual and automatic machine vision calibration, reducing setup time and improving throughput.

Stability of nanosecond and picosecond laser processing
Nanosecond and picosecond lasers provide high-energy pulses in extremely short durations, which can accurately modify the surface of glass substrates or ablate silicon with minimal thermal damage to surrounding materials. But the success of these processes largely depends on the stability and support of the substrate. When incorporated into fixtures or vacuum chucks, the mechanical strength and heat resistance of PTFE G400 ensure that the substrate remains securely in place. This precise positioning requires a laser beam to achieve the desired Bessel beam structure or milling through ablation.

The multifunctionality of PTFE fillers
PTFE G400 can be customized with various fillers to meet specific application requirements:
Carbon fiber. This provides excellent mechanical strength and conductivity, making it ideal for applications that require strong support and conductivity.

Different types of glass (including fused silica). Improve dimensional stability and reduce thermal expansion. Fused silica has excellent thermal shock resistance and is suitable for high-temperature applications.

The availability of these different fillers enables PTFE G400 to be customized for various laser processing environments to ensure optimal performance and durability.

Efficient and reproducible laser processing
The combination of enhanced visibility, precise alignment, and stable support provided by PTFE G400 is crucial for efficient and repeatable laser processing of glass and silicon substrates (see Figure 4). Repeatability is a key factor in industrial manufacturing, requiring consistent quality and performance in large-scale production operations. PTFE G400 helps achieve this goal by ensuring that each substrate is processed under the same conditions with minimal changes in positioning or alignment. This consistency translates into higher output and reduced waste, ultimately leading to cost savings and increased productivity.

Due to these reasons, the use of glass filled PTFE G400 has changed the laser processing of glass and silicon substrates:
Its unique properties, including mechanical strength, high temperature resistance, chemical inertness, and low friction coefficient, make it an ideal material for supporting substrates in nanosecond and picosecond laser structures and ablation processes.

Its bright white appearance improves visibility and helps with precise alignment of the substrate, which is crucial for efficient and repeatable laser processing.

The availability of various fillers, such as bronze, carbon fiber, and different types of glass, allows customization to meet specific application needs.

With the continuous advancement of laser processing technology, the role of materials will still be essential to ensure the highest standards of manufacturing accuracy, quality, and repeatability.

Source: OFweek

関連のおすすめ
  • AWOL Vision will showcase cutting-edge laser projectors and award-winning innovations at CEDIA 2023

    AWOL Vision has announced that it will be showcasing the latest innovations in home entertainment at this year's CEDIA Expo in Denver, Colorado from September 7-9.At the show, AWOL Vision will debut the new LVV-3000 Pro and LVV-3500 Pro laser projectors with Dolby Vision and Control4 integration, and will showcase the latest Vanish TV, The TV recently received the prestigious "IFA 2023 Best of the...

    2023-09-08
    翻訳を見る
  • Petrobras will use laser beams to measure wind speed and direction

    Petrobras announced last week that it plans to use laser beams to measure wind speed and direction. The idea is that these data will be used to improve the operation of the wind turbines maintained by this state-owned company in North Rio Grande do.The total investment of the 2.0 version of this device reaches R $11.3 million, known as the offshore wind assessment remote buoy.This technology can a...

    2023-10-24
    翻訳を見る
  • The world's first scalable optical quantum computer prototype has been launched

    Canada's Xanadu Quantum Technologies has developed the world's first scalable optical quantum computer prototype. The company published an article in the latest issue of Nature detailing its design and construction process, and demonstrating how the prototype can be flexibly scaled up to the required scale. This breakthrough lays an important foundation for the development of large-scale quantum c...

    02-12
    翻訳を見る
  • The Mysteries of Atmospheric Chemistry: Transient Absorption Spectroscopy Study Using FERGIE

    backgroundDr. Daniel Stone's research team from the University of Leeds in the UK is primarily focused on the study of oxidation reactions in the atmosphere and combustion processes. Dr. Stone is particularly interested in the chemical reaction processes of active substances that can control atmospheric composition and fuel combustion processes, such as hydroxide (OH), peroxide (HO2), and Crigee i...

    2024-03-06
    翻訳を見る
  • Xi'an Institute of Optics and Fine Mechanics has made significant progress in attosecond imaging research

    Recently, the Xi'an Institute of Optics and Fine Mechanics of the Chinese Academy of Sciences has made significant progress in attosecond imaging research, achieving high-resolution imaging of ultra wide spectrum light sources. The related results were published in the journal Photonics Research under the title "Snapshot coherent diffraction imaging across ultra wideband spectra".Figure 1. Demonst...

    2024-10-26
    翻訳を見る