chanelink logo
CHANELINK
日本語

Creativity Falcon 2 laser cutting machine will be launched in Germany equipped with a new 60W laser head

361
2024-05-29 14:50:08
翻訳を見る

Starting from June 20th, The Creativity Falcon 2 laser cutting machine will also be launched in Germany, equipped with a new 60W laser head. With this ability, fully encapsulated equipment can now also be carved into steel.

 


High power is achieved through twelve 5-watt laser diodes, whose beams are combined with each other. This will make it possible to cut 22mm thick lime wood and 30mm thick organic glass. According to the manufacturer, stainless steel plates can not only be carved but also cut 0.2 millimeters thick. For example, by turning off a single diode (through software), the laser power of sensitive materials can also be reduced. The cutting machine should belong to Laser Class 1.

For thinner materials, it is said that the cutting speed of the new laser head is more than three times faster, for example, the cutting speed of 5mm walnut plywood can reach up to 700 millimeters per second. Due to its high power, the material evaporates faster, resulting in almost no smoke generated at the cutting edges.

The shell comes with a prominent orange transparent cover, providing safety features in case of accidental opening. There is also a drawer at the bottom that can collect cutting waste and is easy to clean. The 1.6W laser head is also equipped with a laser cutting machine, which is said to be more suitable for fine carving.

Falcon2 60W is now available for booking with a discount of over 400 euros. At that time, its price was only 2439 euros, not 2872 euros. In addition to the second laser head, an air assisted compressor is also provided.

Source: Laser Net

関連のおすすめ

  • What are the "unique secrets" of each family in terms of breaking the game and high reaction materials?

    Laser is considered a sharp sword that cuts iron like mud, but even sharper swords can have tricky moments. For example, in certain scenarios, there are materials with higher reflectivity, such as silver, copper, etc., known as "high reflection materials". High reflective materials have a low absorption rate for lasers, making them difficult to process and potentially causing equipment failure or ...

    2023-11-06
    翻訳を見る

  • STL's new 160 micron fiber optic can meet emerging network and pipeline capacity requirements

    STL unveiled its new 160 micron fiber optic for the first time at the 2023 India Mobile Conference Trade Show.The company claims that its 160 micron fiber optic was conceptualized and developed at its Center of Excellence in Maharashtra, India, and its cable capacity is three times that of traditional 250 micron fiber optic. STL Company.After the launch of 160 micron fiber at the 2023 India Mobile...

    2023-11-01
    翻訳を見る

  • LiDAR solutions provider Cepton acquired by KOITO

    On July 29, 2024, Cepton, a provider of high-performance LiDAR solutions, announced the signing of the final agreement for its acquisition, making it the acquiring company's subsidiary in the United States.Image source: CeptonAccording to the agreement, the acquirer is the internationally renowned automotive lighting giant KOITO, which was established in 1915 and has a history of over a hundred ye...

    2024-08-01
    翻訳を見る

  • Allocate 10 billion US dollars! New York State to Build NA Extreme UV Lithography Center

    On December 11th local time, New York State announced a partnership with companies such as IBM, Micron, Applied Materials, and Tokyo Electronics to jointly invest $10 billion to expand the Albany NanoTech Complex in New York State, ultimately transforming it into a high numerical aperture extreme ultraviolet (NA EUV) lithography center to support the development of the world's most complex and pow...

    2023-12-15
    翻訳を見る

  • Amazemet uses Siemens Xcelerator software for scaling metal 3D printing

    Polish metal 3D printing company Amazemet uses the Xcelerator software combination from industrial manufacturing company Siemens.The spin off company of Warsaw University of Technology is using Siemens workflow management software to develop its metal powder atomizer and 3D printing post-processing equipment.Amazemet was founded in 2016, and its ultrasonic atomization device is capable of producin...

    2024-04-18
    翻訳を見る