日本語

First time! Significant progress has been made in low repetition rate fully polarization maintaining nine cavity fiber lasers

181
2024-05-07 16:45:29
翻訳を見る

Recently, the research team of the Aerospace Laser Technology and System Department of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, reported for the first time a low repetition frequency full polarization maintaining 9-shaped cavity fiber laser at 915 nm. The relevant research results were published in Optics Express under the title "Low repetition rate 915 nm figure-9 ultrafast laser with all fiber structure".

Laser with a wavelength around 900 nm is highly favored in the field of optical measurement due to its high responsiveness on silicon-based detectors. The low repetition rate fiber laser in this band can effectively reduce distance ambiguity in Time of Flight (TOF), and has the characteristics of good beam quality, compact structure, and long-term stability, making it an ideal light source for space detection. However, due to the strong dispersion and nonlinear effects of single-mode fibers, it is difficult for lasers to achieve single pulse operation in long fiber cavities. Therefore, the repetition frequency of traditional mode-locked fiber lasers is usually limited to tens to hundreds of MHz.

In response to the above issues, researchers have proposed a low repetition rate fully polarized nine cavity fiber laser with a central wavelength of 915 nm. By designing and optimizing the laser structure, high-energy single pulse output was achieved at low repetition rates. The optimized seed was amplified in one stage to obtain a pulse output with a pulse width of 15.2 ps and a single pulse energy of 4.7 nJ at a repetition frequency of 3.1 MHz. The mode locking performance of the laser has been confirmed through long-term power and spectral stability tests. This compact and long-term reliable fiber laser is a promising light source for future space laser ranging.

This work was supported by the Youth Innovation Promotion Association of the Chinese Academy of Sciences, the National Natural Science Foundation of China, and the Shanghai Natural Science Foundation.

Figure 1. Experimental setup diagram of a 915 nm low repetition rate fully polarization maintaining nine cavity fiber laser

Figure 2. Long term stability testing of output power and spectrum, and output characteristics of pulses in frequency and time domains

Source: Yangtze River Delta Laser Alliance

関連のおすすめ
  • Fiber laser and deburring machine have improved the production efficiency and manufacturing capability of MITS Alloy

    The heavy-duty aluminum Ute tray and roof series of MITS Alloy have been greatly welcomed and demanded.The company is headquartered in Newcastle and was founded by Tim Lightfoot and Tony Brooks in January 2015. Tim's existing business, Safety MITS, provides maintenance equipment for mining, earthwork transportation, transportation, and related industries. They jointly determined that the four-whee...

    2024-05-15
    翻訳を見る
  • BLM Launches Tunable 4kW Five Axis Laser Cutting System

    Recently, the Italian laser pipe processing group BLM Group announced the launch of an LT-Free five axis laser cutting system that can be used for laser cutting and processing of any three-dimensional metal profile, including bending forming, hydraulic forming, extrusion forming, deep drawing forming, flat or stamped forming of pipe fittings or plates.This five axis laser cutting system can provid...

    2023-10-11
    翻訳を見る
  • Innovative laser based rain enhancement project launched by UAEREP and DERC teams

    Recently, the UAE Rainfall Enhancement Scientific Research Program launched a groundbreaking project with Dr. Guillaume Matras and his team from the Directional Energy Research Center of the Institute of Technology Innovation, aiming to address the challenge of global water shortage through advanced technology. This collaboration marks an important milestone in the field of rainfall enhancement sc...

    2024-03-02
    翻訳を見る
  • Trumpf China 25 Years: From Model Factory to Global Strategic Fortress

    On March 14, 2000, Trumpf established its first company in China - Trumpf Metal Sheet Products Co., Ltd., headquartered in Taicang, 50 kilometers northwest of Shanghai. Nowadays, Taicang has become a global strategic stronghold for the company. 25 years ago, this production base was originally used to demonstrate sheet metal processing production for Chinese enterprises. In the seventh year afte...

    03-26
    翻訳を見る
  • Yongxin Optics: Launch of the "Multimodal Nanoresolution Microscope" Project

    Recently, the launch and implementation plan demonstration meeting of the "Multimodal Nano Resolution Microscope" project led by Ningbo Yongxin Optics Co., Ltd. was successfully held in Ningbo. This is the fourth time Yongxin Optics has led a national key research and development plan project and received support, indicating that the company's ability to undertake national level technological rese...

    04-10
    翻訳を見る