日本語

Shanghai Optics and Machinery Institute has made progress in the research of new terahertz sources based on Yb lasers

387
2024-04-09 15:40:54
翻訳を見る

Recently, the State Key Laboratory of Intense Field Laser Physics of the Chinese Academy of Sciences Shanghai Institute of Optics and Fine Mechanics has made new progress in generating intense field terahertz waves based on Yb laser pumped organic crystals. The relevant research results were published in Applied Physics Letters under the title "Efficient strong field THz generation from DSTMS crystal pumped by 1030nm Yb laser".

Compared to inorganic crystals such as ZnTe and LiNbO3, organic crystals such as DAST and DSTMS have higher nonlinear coefficients and lower absorption coefficients in the terahertz frequency band. In previous studies, infrared ultra short pulse lasers with wavelengths ranging from 1200 to 1700nm were generally used to pump organic crystals for better phase matching and higher terahertz conversion efficiency. However, obtaining high-energy ultra short laser pulses in this band requires frequency conversion using techniques such as OP (CP) A, which not only greatly reduces energy conversion efficiency and system stability, but also increases equipment cost and complexity. In recent years, ultrafast Yb lasers have received attention from the scientific and industrial communities due to their advantages in low cost, high power, and miniaturization. The use of Yb laser to directly drive crystals to generate terahertz waves provides ideas for the development of integrated terahertz sources, as well as opportunities for the development of related scientific research and application fields.

This study elucidates the phase matching conditions for the generation of terahertz waves by organic crystal optical rectification pumped by ultra short pulse lasers, and analyzes the dependence of terahertz frequency, coherence length, etc. on the pumped laser. The research team utilized Yb laser pumped organic crystal DSTMS to generate strong field terahertz. By designing phase matching in the terahertz band and optimizing conditions such as pump laser pulse width and power density, a single pulse energy of 0.4 is obtained μ J. A strong field terahertz wave with a peak field strength of 236 kV/cm, covering a frequency spectrum of 0.1-6 THz, and a laser terahertz wave energy conversion efficiency of 0.22%. The above relevant experiments have verified the feasibility of Yb laser pumping organic crystals to generate milliwatt level high-power strong field terahertz waves, providing a new integrated terahertz light source scheme for scientific research and application promotion in related fields.

Relevant work has been supported by the national key research and development plan, the National Natural Science Foundation of China, and the Chinese Academy of Sciences instrument and equipment development project.

Figure 1. Generation and characterization of strong field terahertz waves (a) Experimental optical path; (b) Terahertz time-domain waveform and spectrum (illustrated as terahertz focal spot).

Figure 2. Laser terahertz wave phase matching (a) The refractive index of DSTMS crystal in the infrared and terahertz bands; (b) The dependence of terahertz frequency, coherence length, etc. on the wavelength of the pump laser; (c) The terahertz coherence length at a pump laser wavelength of 1030 nm; (d) The absorption characteristics of DSTMS crystals in the infrared and terahertz bands.

Source: Shanghai Institute of Optics and Mechanics

関連のおすすめ
  • 150 kW Ultra High Power Laser Sensor Released

    Recently, MKS announced the launch of a brand new Ophir ® A 150 kW ultra-high power laser sensor designed specifically for measuring ultra-high power levels up to 150 kW. This sensor has excellent accuracy and reliability, suitable for industrial and defense fields.This water-cooled calorimeter has a working wavelength range of 900-1100 nm and can measure power from 10 kW to 150 kW. Its extremely ...

    2024-12-27
    翻訳を見る
  • Overview: High throughput preparation of alloy composition design in additive manufacturing

    Researchers from the New Materials Technology Research Institute of Beijing University of Science and Technology and the Beijing Modern Transportation Metal Materials and Processing Laboratory reported a review of high-throughput preparation of alloy composition design in additive manufacturing. The relevant research is titled "High throughput preparation for alloy composition design in additive m...

    2024-07-08
    翻訳を見る
  • The creator of a computer that uses lasers to perform complex tasks at the speed of light has announced a breakthrough in high-performance computing

    LightSolver's new LPU100 system is powered by 100 lasers and can solve the most challenging problems through up to 120100 combinations.This computer was created by Dr. Ruti Ben Shlomi, CEO of LightSolver and Dr. Chen Tradonsky, CTO, a physicist at the Rehowatt Weizmann Institute for Science.It is not suitable for household use because its high computing power exceeds individual needs, but it is su...

    2024-03-21
    翻訳を見る
  • Micro devices output powerful lasers at room temperature, reducing power consumption by 7 times

    Recently, researchers at the Rensselaer Polytechnic Institute in the United States have invented a miniature device thinner than human hair, which can help scientists explore the essence of light and matter and unravel the mysteries of the quantum field. The most important advantage of this technology is that it can work at room temperature without the need for complex infrastructure. The resea...

    2024-05-29
    翻訳を見る
  • A new approach to 3D printing has been published in a Nature journal

    In the last century, the improvement of mechanical properties of structural metals was mainly achieved through the creation of increasingly complex chemical compositions. The complexity of this ingredient increases costs, creates supply fragility, and makes recycling more complex.As a relatively new metal processing technology, metal 3D printing provides the possibility to re-examine and simplify ...

    2024-11-29
    翻訳を見る