日本語

The breakthrough of coherent two-photon lidar overcomes distance limitations

379
2023-12-08 14:07:12
翻訳を見る

Schematic diagram of experimental setup
New research has revealed advances in light detection and ranging technology, providing unparalleled sensitivity and accuracy in measuring the distance of distant objects.

This study was published in the Physical Review Letters and was the result of a collaboration between Professor Yoon Ho Kim's team at POSTECH in South Korea and the Center for Quantum Science and Technology at the University of Portsmouth.

Coherent LiDAR has long been the cornerstone of ranging, but its ability is limited by the coherence time of the light source. In a groundbreaking initiative, researchers have introduced two-photon LiDAR to eliminate the range limitation imposed by coherence time, enabling accurate and precise ranging of distant objects with coherence time determined by the spectral bandwidth of far exceeding light sources.

The inspiration for this study comes from the recent work led by Professor Vincenzo Tamma, Director of the Center for Quantum Science and Technology, which utilizes two-photon interference of thermal light, surpassing coherence. Unlike traditional coherent lidar, coherence time is a limiting factor, and the second-order interference fringes in coherent two-photon lidar are not affected by the short coherence time of the light source and are determined by its spectral bandwidth.

The experimentally proven scheme utilizes a simple thermal light source, such as sunlight, interacting with a double slit mask, where two slits A and B are separated by more than the coherence length of the light source, as well as two cameras. The light emitted from two slits either travels along a known optical length path towards the first detector D1 or propagates at an unknown distance towards a distant object, and is detected by the second detector D2 after being reflected by it.

A recent study led by Professor Tamma, in collaboration with Bari University and POSTEC in South Korea, has theoretically demonstrated for the first time that even in the presence of turbulence, the distance of distant objects can be estimated by measuring the spatial correlation of light intensity detected by two detectors.

If either of the two slits is closed, phase dependent interference cannot be observed. The famous Hanbury Brown and Twist experiments were in this situation, paving the way for the development of quantum optics and quantum technology in 1954. In fact, in the standard HBT two-photon interference, due to the contribution of only one slit at that time, interference jitter can be observed by correlated measurements of the light intensity of the two detectors.

However, when both slits are open, one can observe an additional, but this time depends on the interference contribution of the phase, which depends on the unknown distance of the remote object, and is caused by interference between two possible two-photon paths from two different slits to two detectors, as mentioned earlier.

From a fundamental perspective, the generation of this phase dependent contribution is a highly counterintuitive effect and is at the core of this technological influence, which has now been experimentally demonstrated in Professor Yoon Ho Kim's laboratory at POTECH.

This new study indicates that the coherent company's two-photon LiDAR has robustness to turbulence and environmental noise, marking a significant leap in the applicability of LiDAR technology in challenging environments.

"This breakthrough opens up new applications of two-photon correlation in classical light, breaking through the boundaries previously believed to be possible for LiDAR technology," said Professor Tamma, co-author of the study. "Our coherent two-photon lidar technology not only overcomes the range limitations related to coherence time, but also exhibits extraordinary resilience in the face of external interference."

These findings may lead to the development of new sensing technologies based on the use of thermal optical correlation measurements. These products may be used in autonomous vehicle, robots, environmental monitoring and other fields.

The ability to measure distances beyond coherent time with higher accuracy and reliability may reshape industries that rely on precise distance measurement.

The research team envisions collaborating with industry partners and stakeholders to further develop and implement coherent two-photon lidar in the real world.

Source: Laser Net

関連のおすすめ
  • Due to research conducted by scientists from South Korea and the UK, the power of lasers will increase by one million times

    Due to research conducted by scientists from South Korea and the UK, the power of lasers will be able to increase by one million times. The researchers plan to apply this improvement for scientific purposes.The study was led by representatives of Strathclyde University and the Korea Institute UNIST and GIST. Behind the scenes footage of their work in the journal Nature Photonics. It has been prove...

    2023-11-27
    翻訳を見る
  • 国内自主研发首套碳化硅晶锭激光剥离设备投产

           近日,从江苏通用半导体有限公司传来消息,由该公司自主研发的国内首套的8英寸碳化硅晶锭激光全自动剥离设备正式交付碳化硅衬底生产领域头部企业广州南砂晶圆半导体技术有限公司,并投入生产。 图:8英寸SiC晶锭激光全自动剥离设备       该设备可实现6英寸和8英寸碳化硅晶锭的全自动分片,包含晶锭上料、晶锭研磨、激光切割、晶片分离和晶片收集,一举填补了国内碳化硅晶锭激光剥离设备领域研发、制造的市场空白,突破了国外的技术封锁,将极大地提升我国碳化硅芯片产业的自主化、产业化水平。       该设备年可剥离碳化硅衬底20000片,实现良率95%以上,与传统的线切割工艺相比,大幅降低了产品损耗,而设备售价仅仅是国外同类产品的1/3。       近年来,碳化硅功率器件在大功率半导体市场中所占的份额不断提高,并被广泛应用于新能源汽车、城市轨道交通、风力发电、高速移动、物联网等一系列领域...

    2024-08-26
    翻訳を見る
  • Brother Australia launches innovative professional monochrome laser series

    Brother Australia is a renowned printing manufacturer that has expanded its product portfolio by launching its latest innovative commercial machine series, the professional monochrome laser machine series. These extraordinary devices are designed to extend the lifespan of commercial printing cycles and improve productivity. Due to their sturdy components and durable consumables, these extraordinar...

    2024-03-21
    翻訳を見る
  • CinIonic launches a new cinema screen specifically designed for laser theaters

    CinIonic announced the launch of a new cinema screen specifically designed for laser auditoriums. CinIonic Laser Screen 2.4 amplifies the power of laser projection by optimizing efficiency and enhancing screen presentation. This new screen is aimed at becoming the ideal companion for CinIonic Laser and is the first screen product in the CinIonic All Laser Solution portfolio.The CinIonic laser scre...

    2023-09-20
    翻訳を見る
  • The Innovation Road of Laser Welding Automation Production Line for New Energy Vehicle Motor stators

    With the increasing global attention to environmental protection and sustainability, new energy vehicles have become an important trend in the automotive industry. In this context, the production method of the core component of new energy vehicles - the motor stator - has also undergone profound changes. Welding, as a key manufacturing process, has brought disruptive innovation to the manufacturin...

    2024-02-28
    翻訳を見る