日本語

Scientists have conducted a series of studies on the mechanical properties and flame retardancy of laser formed Ti40 flame-retardant titanium alloy

833
2023-08-15 15:25:44
翻訳を見る

Recently, Professor Huang Chunping's team from Nanchang University of Aeronautics and Astronautics conducted a series of studies on the mechanical and flame retardant properties of laser formed Ti40 flame retardant titanium alloy. The research team used typical Ti40 flame-retardant titanium alloy as the research object and prepared Ti40 flame-retardant titanium alloy using LSF technology. The microstructure, mechanical properties, and flame retardancy of laser formed specimens and traditional forged specimens were studied. 

At the same time, the superior flame retardancy and mechanical properties of laser formed specimens compared to traditional forged specimens were studied and discussed. The relevant research results are published in the Journal of Manufacturing Processes under the title of "Achieving superior burn resistance and mechanical properties of Ti40 alloy by laser solid forming". The author of the paper is Huang Qimin, a master's student, and the corresponding authors are Dr. Liu Fenggang and Professor Huang Chunping.

Ti40 (Ti-15V-25Cr) flame-retardant titanium alloy is a new type of highly stable β Titanium alloy has excellent comprehensive mechanical properties and flame retardancy, and is widely used in high bypass ratio large engine fan compressor components and other structures. However, its high temperature plasticity and flowability are poor, resulting in high processing costs, long cycles, and low material utilization in traditional mechanical processing. 

Therefore, there is an urgent need to find a new manufacturing technology to improve these issues. With the development of additive manufacturing technology, laser solid forming (LSF) technology based on laser cladding and rapid prototyping has also been widely applied. It can directly manufacture parts from CAD models and repair damaged parts, bringing new ideas and methods for the processing and manufacturing of flame retardant titanium alloys.

Based on the above research, the LSF process has improved the problems of high processing cost, long cycle time, and low material utilization brought about by traditional mechanical processing of Ti40. Ti40 alloy prepared by laser stereoforming technology has better mechanical properties compared to forged parts. At the same time, due to the special tempering effect during the laser stereoforming process, the Ti40 alloy β The precipitation of Ti5Si3 with high melting point can not only improve the oxidation efficiency of V and Cr elements by retaining pores, but also slow down the peeling of the oxide layer by strengthening the bonding between the matrix and the oxide layer, improving the flame retardancy of Ti40. The study of the mechanical properties and flame retardancy of Ti40 alloy prepared by LSF technology provides a new technical means for achieving high-performance, fast, and low-cost preparation of complex structural components of flame retardant titanium alloy.

Source: Laser Manufacturing Network

関連のおすすめ
  • Kearns Launches 3-Axis Controlled UV Laser Marking Machine to the UK Market

    Recently, Keyence announced that it has delivered the MD-U series of 3-axis controlled UV laser marking machines to its UK customers. This product technology utilizes ultraviolet lasers with high absorption rates to perform cold labeling on various materials - a process that can be carried out under minimum thermal stress.UV laser is generated by passing a standard wavelength laser (1064nm) throug...

    2023-10-09
    翻訳を見る
  • Scientists at Peking University invent ultra-thin optical crystals for next-generation laser technology

    BEIJING, Dec. 19 (Xinhua) -- A team of Chinese researchers used a novel theory to invent a new type of ultrathin optical crystal with high energy efficiency, laying the foundation for next-generation laser technology.This photo taken on Dec. 15, 2023 shows a Twist Boron Nitride (TBN) crystal placed on a piece of fused silica in Peking University, Beijing, capital of China. A team of Chinese rese...

    2023-12-20
    翻訳を見る
  • Polarization polariton topology pointing towards a new type of laser

    Semi light, partially matter quasi particles, known as excitons polaritons, can easily bypass obstacles and condense into a single coherent state - both of which are characteristics of topological insulators. Researchers from the United States and China have developed a new technology to manufacture microcavities from chloride based halide perovskites. They expect this work to lead to a new type o...

    2024-05-30
    翻訳を見る
  • DataLase launches a new laser active transparent to white coating

    Laser coding and marking technology expert DataLase has launched a series of new colorless to white coatings for a range of packaging applications.These coatings are centered around biodegradable and sustainably sourced raw materials, providing high contrast white printing even on difficult substrates such as 12 micron PET and shrink film, under the weight of flexographic and gravure coatings. Thi...

    2024-03-09
    翻訳を見る
  • How to choose between continuous and pulsed fiber lasers?

    Fiber laser, with its simple structure, low cost, high electro-optical conversion efficiency, and good output effect, has been increasing in proportion in industrial lasers year by year. According to statistics, fiber lasers accounted for 52.7% of the industrial laser market in 2020.According to the characteristics of the output beam, fiber lasers can be classified into two categories: continuous ...

    2023-12-20
    翻訳を見る