chanelink logo
CHANELINK
日本語

Burning complete frame (betwn shapes) shapes

カテゴリ:
レーザ
タグ:
935
1
翻訳を見る
2023-05-22

Hello, I am using foxalian mastur 20watt laser. before upgrade i was not having any issues, now with 1.4 upgrade its burning teh hole frame not just the image. i was doing a gray scall test and it did the hole image. i have posted the $$ below… i also confirm S value is set to the same has $30. i have looked at other posted and still no help.

$$

$0=10

$1=255

$2=0

$3=0

$4=0

$5=0

$6=0

$10=3

$11=0.010

$12=0.002

$13=0

$20=0

$21=0

$22=0

$23=3

$24=25.000

$25=1000.000

$26=250

$27=1.000

$30=1000

$31=0

$32=1

$100=80.000

$101=80.000

$102=801.670

$110=2000.000

$111=2000.000

$112=1200.000

$120=300.000

$121=300.000

$122=30.000

$130=400.000

$131=380.000

$132=55.000
C

    • David

      2023-05-23
      It’s most likely either one of the two:
1. the image is not true white or has noise that’s not white or transparent.
2. your minimum power value for the grayscale layer is non-zero
The quality of the burn itself looks off so there may be something else going on at the same time.
There’s also the possibility of a hardware failure but I’d suggest ruling out any setting issues.
        翻訳を見る
        返信
      関連する推奨事項
      収集
      報告