Some confusion about the RDC6445G controller

Cruise Wang

カテゴリ:

Ruida

タグ:

RDC6445G

830

翻訳を見る

2023-04-18

Hello everyone, I want to use the RDC6445G controller for the first time and I have some doubts:

1- is it not necessary to reset the axes?

2- Are the inputs on the CN3-CN4 connectors related to the hardware limit switches?

3- where can I find all the documentation?

4- Are the outputs on the CN1 connector programmable?

Thanks in advance

Rajiv001

2023-04-19

I would say pick a different model as the laser output on the 445g seams in reliable mostly becuse mine is fireing randomly wile the machine returns to Origen or I jog it from the pc

翻訳を見る

返信

950nidyR

2023-10-02

Hi everybody. Where can I download firmware for rdc6445g-mod5?

翻訳を見る

返信

Some confusion about the RDC6445G controller

Once powered on, the cutting head will always move upward, and will not stop. Switch to the manual state, and the motor can be controlled to move, and then switch to the automatic mode, and always mov

The laser light is weak and cannot be controlled

No blowing during processing, no signal output

RDC6332M, when it can follow up, press the auto focus button, the laser head starts to descend, touches the iron plate, and then rises to the reference focus position, and then stops, without lifting

6445G USB or Ethernet wont connect