Italiano

Shanghai Institute of Optics and Fine Mechanics has achieved beam splitting vortex control and interference detection for the first time in the 46.9nm wavelength band

358
2024-10-17 11:48:39
Vedi traduzione

Recently, Associate Researcher Zhang Junyong from the High Power Laser Physics Joint Laboratory of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, together with Professor Zhao Yongpeng's research group from Harbin Institute of Technology and Professor Zhan Qiwen's research group from Shanghai University of Technology, completed the experimental verification of 46.9nm band splitting vortex control and interference detection for the first time, opening up a feasible technical path for shorter wavelength structural splitting control and soft X-ray array structural imaging. The related achievements were published in Nanophotonics under the title "Vortex bifocusing of extreme ultraviolet using modified Fermat spectral photon sieve splitter".

Fresnel zone plates were successfully applied to X-ray focusing in the 1960s, and the emergence of photon screens in 2001 provided a device choice different from traditional zone plates for high-performance focusing of short waves. Vortex light carries orbital angular momentum, and its spiral phase wavefront causes a phase singularity at the center, resulting in a hollow beam. This has important potential applications in particle manipulation, optical communication, quantum information processing, high-resolution microscopy imaging, and other fields.

In principle, various types of spiral lines can generate similar vortex light fields. Based on this guiding principle, researchers have designed an improved Fermat spiral photon sieve for vortex beam splitting at a wavelength of 46.9nm. In the gas discharge plasma extreme ultraviolet 46.9nm laser experiment, two split vortex spots with opposite topological charges were successfully obtained. Figure 1 shows the results of the 46.9nm vortex focusing experiment, and Figure 2 shows the interference results of the two vortex rotations of the split beam with the reference light. The single cross wire indicates that the topological charge of the vortex rotation is 1, and the cross wire azimuth reflects the opposite chirality of the vortex light. Due to its natural hollow structure, self-supporting irregular photon screens are particularly suitable for short wavelength structural beam splitting control, which provides new development opportunities for future soft X-ray beam splitting vortex control and interference, structural control of high-order harmonic attosecond light, and array sensing imaging.

Figure 1. Focusing experiment of 46.9nm wavelength split vortex, (a) schematic diagram of optical path, (b) vortex focusing spot, (c) full width at half maximum.

Figure 2. Interference measurement of 46.9nm wavelength split vortex, (a-b) simulation results, (c) experimental results.

Relevant work has been supported by the National Natural Science Foundation of China, the Sailing Plan for Young Scientific and Technological Talents in Shanghai, and the Class A project of the Chinese Academy of Sciences' strategic leading science and technology project.

Source: Opticsky

Raccomandazioni correlate
  • Scientists at Peking University invent ultra-thin optical crystals for next-generation laser technology

    BEIJING, Dec. 19 (Xinhua) -- A team of Chinese researchers used a novel theory to invent a new type of ultrathin optical crystal with high energy efficiency, laying the foundation for next-generation laser technology.This photo taken on Dec. 15, 2023 shows a Twist Boron Nitride (TBN) crystal placed on a piece of fused silica in Peking University, Beijing, capital of China. A team of Chinese rese...

    2023-12-20
    Vedi traduzione
  • Microstructure evolution and mechanical properties of Ti-6Al-4V alloy prepared by dual ultrasonic vibration assisted directional energy deposition

    1. Research backgroundDirected energy deposition (DED), as an efficient and economical technology in the field of additive manufacturing (AM), is widely used in the manufacturing of metal materials. However, its high heating and cooling rates, as well as significant temperature gradients, often lead to rapid solidification, forming cross layer columnar grains and internal defects, seriously affect...

    03-21
    Vedi traduzione
  • Ultrafast laser technology continues to reach new heights

    Ultra short pulse lasers, such as femtosecond lasers, are increasingly becoming easy-to-use plug and play devices suitable for a wide range of industrial and biomedical applications. Fifteen years ago, the volume of these lasers was still very large, requiring daily cleaning of optical components, regular maintenance of cooling water, and continuous optimization of laser parameters. Nowada...

    2023-11-06
    Vedi traduzione
  • Shanghai Optics and Machinery Institute has made new progress in laser welding of new high-temperature nickel based alloys

    Recently, the research team of Yang Shanglu from the Laser Intelligent Manufacturing Technology R&D Center of the Chinese Academy of Sciences Shanghai Institute of Optics and Precision Machinery has made new progress in laser welding of new structural materials for high-temperature molten salts. The research team used a high-power laser for the first time to achieve defect free welding of nick...

    2023-09-01
    Vedi traduzione
  • Breakthrough in optical quantum simulation using long-lived polariton droplets

    Abstract: A groundbreaking discovery by CNR Nanotec and scientists from the University of Warsaw has revealed a robust method for creating long-lived quantum fluids using semiconductor photonic gratings. This study, published in the journal Nature Physics, marks a significant step forward in simulating complex systems through unique polariton droplets that demonstrate stability in lifespan and rec...

    2024-03-27
    Vedi traduzione