chanelink logo
CHANELINK
Italiano

Creativity Falcon 2 laser cutting machine will be launched in Germany equipped with a new 60W laser head

824
2024-05-29 14:50:08
Vedi traduzione

Starting from June 20th, The Creativity Falcon 2 laser cutting machine will also be launched in Germany, equipped with a new 60W laser head. With this ability, fully encapsulated equipment can now also be carved into steel.

 


High power is achieved through twelve 5-watt laser diodes, whose beams are combined with each other. This will make it possible to cut 22mm thick lime wood and 30mm thick organic glass. According to the manufacturer, stainless steel plates can not only be carved but also cut 0.2 millimeters thick. For example, by turning off a single diode (through software), the laser power of sensitive materials can also be reduced. The cutting machine should belong to Laser Class 1.

For thinner materials, it is said that the cutting speed of the new laser head is more than three times faster, for example, the cutting speed of 5mm walnut plywood can reach up to 700 millimeters per second. Due to its high power, the material evaporates faster, resulting in almost no smoke generated at the cutting edges.

The shell comes with a prominent orange transparent cover, providing safety features in case of accidental opening. There is also a drawer at the bottom that can collect cutting waste and is easy to clean. The 1.6W laser head is also equipped with a laser cutting machine, which is said to be more suitable for fine carving.

Falcon2 60W is now available for booking with a discount of over 400 euros. At that time, its price was only 2439 euros, not 2872 euros. In addition to the second laser head, an air assisted compressor is also provided.

Source: Laser Net

Raccomandazioni correlate

  • Researchers use lasers to measure and manipulate magnetic ripple interactions

    One vision for computing the future is to use ripples in magnetic fields as the fundamental mechanism. In this application, magnetic oscillators can be comparable to electricity and serve as the foundation of electronic products.In traditional digital technology, this magnetic system is expected to be much faster than today's technology, from laptops and smartphones to telecommunications. In quant...

    2024-03-05
    Vedi traduzione

  • Progress in the Application of China University of Science and Technology's Femtosecond Laser Processing Technology in the Biomedical Field

    Recently, Associate Professor Li Jiawen's research group at the Micro and Nano Engineering Laboratory of the School of Engineering Science, University of Science and Technology of China proposed a femtosecond laser dynamic holographic processing method suitable for efficient construction of three-dimensional capillary scaffolds, which is used to generate a three-dimensional capillary network. This...

    2024-02-11
    Vedi traduzione

  • Amazemet uses Siemens Xcelerator software for scaling metal 3D printing

    Polish metal 3D printing company Amazemet uses the Xcelerator software combination from industrial manufacturing company Siemens.The spin off company of Warsaw University of Technology is using Siemens workflow management software to develop its metal powder atomizer and 3D printing post-processing equipment.Amazemet was founded in 2016, and its ultrasonic atomization device is capable of producin...

    2024-04-18
    Vedi traduzione

  • Korean laser company AP Systems establishes new AVP equipment division

    Recently, AP Systems, a well-known laser manufacturer in South Korea, established a new AVP equipment division for the advanced packaging field. This business unit will focus on laser equipment required for advanced packaging processes of high bandwidth memory (HBM).AP Systems is a subsidiary of APS Group, mainly focused on the fields of display and semiconductor laser processing equipment. It foc...

    01-15
    Vedi traduzione

  • Shanghai Institute of Optics and Fine Mechanics has made progress in the field of high-intensity laser cracking of high-density polyethylene

    Recently, a team from the National Key Laboratory of Ultra strong Laser Science and Technology at the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, collaborated with the Arctic University of Norway (UiT) to make progress in the efficient cracking of high-density polyethylene (HDPE) using strong laser molecular bond breaking technology. The research results were publ...

    06-16
    Vedi traduzione