chanelink logo
CHANELINK
Italiano

Petrobras will use laser beams to measure wind speed and direction

196
2023-10-24 17:10:48
Vedi traduzione

Petrobras announced last week that it plans to use laser beams to measure wind speed and direction. The idea is that these data will be used to improve the operation of the wind turbines maintained by this state-owned company in North Rio Grande do.

The total investment of the 2.0 version of this device reaches R $11.3 million, known as the offshore wind assessment remote buoy.
This technology can also capture meteorological variables such as atmospheric pressure, temperature, and relative humidity. In addition to oceanographic variables such as waves and currents. All of these data are crucial for determining the potential for wind energy production in a region.

We expect Bravo 2.0 to meet the needs of Petrobras for measuring the potential of offshore wind power in Brazil. This is an important lever for us to promote this new energy, "Carlos Travassos, Director of Engineering, Technology, and Innovation at Petrobras, said in a statement.

The working principle of Bravo 2.0 and how to measure wind
The equipment weighs 7 tons, has a diameter of 4 meters, a height of 4 meters, and is powered by solar modules. In the new version, an algorithm specifically created for this project corrects the collected information based on positional changes caused by waves and currents.

Bravo 2.0 has also been expanded to accommodate two LiDAR sensors instead of one. This type of remote sensor measures the properties of reflected light and allows you to estimate the distance to the object. This improves the collection of data transmitted via satellite to cloud servers for later analysis.

Bravo 2.0 will be launched 20 kilometers from the coast of Rio Grande do Nord, with the support of the Brazilian Navy and the Intersal consortium operating the Black Salanca Salt Terminal.

The testing and measurement activities will continue until March 2024. The information collected by the buoy will be compared with the reference data captured by a fixed LiDAR installed in the same terminal. The idea is to verify the functionality and reliability of equipment measurements.

Source: Laser Network

Raccomandazioni correlate

  • The femtosecond laser was used to manufacture a magnetically responsive "Janus Origami" robot, which realized the effective integration of various droplet manipulation functions

    Recently, the reporter learned from the University of Science and Technology of China that Professor Hu Yanlei's team and his collaborators in the micro-nano Engineering Laboratory of the School of Engineering Science and Technology of the School have prepared a magnetic-responsive double-God origami robot that can be used for cross-scale droplet manipulation using femtosecond laser micro-nano man...

    2023-09-12
    Vedi traduzione

  • Real time measurement of femtosecond dynamics of relativistic intense laser driven ultra-hot electron beams

    In the interaction between ultra short and ultra strong lasers and matter, short pulse width and high energy electrons are generated, commonly referred to as "hot electrons". The generation and transport of hot electrons is one of the important fundamental issues in high-energy density physics of lasers. Superhot electrons can excite ultrafast electromagnetic radiation in a wide range of wavelengt...

    2024-06-21
    Vedi traduzione

  • Accelerating electrons by emitting laser light into a nanophotonic cavity

    The laser driven particle accelerator on silicon chips was created by two independent research groups. With further improvements, this dielectric laser accelerator can be used in medicine and industry, and even in high-energy particle physics experiments.Accelerating electrons to high energy is usually accomplished over long distances in large and expensive facilities. For example, the electron ac...

    2023-10-28
    Vedi traduzione

  • Laser printing on fallen leaves can produce sensors for medical and laboratory use

    The manufacturing of sensors through 3D printing combines speed, design freedom, and the possibility of using waste as a substrate. In the circular economy model, various results have been achieved, and typically discarded residues are used as low-cost resources. A research team in Brazil has proposed a highly creative solution that involves printing electrochemical sensors on fallen leaves. The t...

    2024-05-16
    Vedi traduzione

  • IPG introduces a new dual-beam laser with the highest single-mode core power

    From September 12 to 14, 2023, IPG Photonics, a well-known fiber laser technology leader in the United States, will showcase its latest innovative laser solutions at the Battery Show in Michigan, USA. IPG will also showcase industry-leading fiber laser sources and automated laser systems for electric vehicle battery welding applications.New laser technology pushes the limits of battery welding spe...

    2023-09-14
    Vedi traduzione