My co2 cutting machine has been upgraded with the Ruida control system, model RDC8445S. When I press the reset button, there is no response. What could be causing this? Help!
Puoi rispondere a questa domanda?
Scrivi la tua risposta per aiutare chi ha questa domanda.
Risposta accettataI suggest you check the following items:
1. The software manufacturer's parameter for enabling motor reset is not activated
2. The panel button function is damaged
3. User parameter power-on reset is not enabled
First, inspect the button itself for any damage, wear, spring failure, or stuck internal mechanical structure. Then, check the wiring for correctness.
These are all correct, the reason is that the power on reset enable was not turned on
Hai una domanda simile ma non trovi una soluzione? Pubblica la tua domanda e ricevi aiuto dalla community.
Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.
The reason is that the power on reset enable was not turned on, but after it was turned on, the panel can now be used normally