chanelink logo
CHANELINK
Italiano

During power on and reset, the X axis stopped after touching the limit switch, while the Y axis was still running slowly at the origin.

Categorie:
Ruida
Tag:
732
1
Vedi traduzione
2022-12-30

During power on and reset, the X axis stopped after touching the limit switch, while the Y axis was still running slowly at the origin.
C

    • Marshall

      2023-01-03
      ① The polarity of the Y axis is reversed. Reset the polarity;
② The limit switch is broken and needs to be repaired.
        Vedi traduzione
        Rispondi
      Raccomandazioni pertinenti
      Raccogli
      Segnala