chanelink logo
CHANELINK
Italiano

Can’t choose a Angle for calibrate Lens

Categorie:
Laser
Tag:
884
1
Vedi traduzione
2023-08-10

I bought a Camera for my Omtech 60W 20 X 28" Laser. All the tutorials I see say to attach the camera at the 40 degree angle on the lid. I did so and can’t get a good picture and when I do the alignment the fixed position shows it direcctly above it, and that seems to be the only option. when I do the Dot calibration, it won’t even recognize the dots.
C

    • Cyril

      2023-08-11
      "I did so and can’t get a good picture and when I do the alignment the fixed position shows it direcctly above it, and that seems to be the only option"

Sounds like you’re trying to use the camera with the door closed. I suspect the guidance on the 40 degree angle was meant to allow for straight down view for the camera with the door open.
        Vedi traduzione
        Rispondi
      Raccomandazioni pertinenti
      Raccogli
      Segnala