chanelink logo
CHANELINK
Italiano

Pictures burning crooked

Categorie:
Laser
Tag:
856
1
Vedi traduzione
2023-04-10

My laser is engraving pictures crooked. I have checked to make sure the OLM 3 frame is square and it is. I squared the plywood to the front of the machine. I measured the distance of the gantry to the front of the frame and it is the same. I have tried rotating the image and the plywood as you can see in the pictures. Any ideas what is going on?
C

    • Smith

      2023-04-11
      Are you running in inches? If so, this is a known firmware issue with the Ortur, and solved with a recent update.
        Vedi traduzione
        Rispondi
      Raccomandazioni pertinenti
      Raccogli
      Segnala