Lightburn v1.4.03 on Win 10 machine is not working. Offset outward actually offsets both directions. Offset inwards does nothing. Offset both works as intended.
2023-10-2627810Hi, I am new here,I use ubuntu and my notebook is a Acer Aspire 5.The problem is not show layers. I can’t select colors.
2023-10-2624310Recently the laser quietly stopped firing in the middle of a simple job. It was just cutting a straight line at about 20mA.The rest of the machine still works normally. No error messages. The power supply’s fan is running.What I’ve tried:Controller Pulse button = nothing happens. No movement on ammeter, and laser doesn’t fire.Test...
2023-10-2528010HiWhat is the reason that the laser cuts great in the Y axis but worse in the X axis?
2023-10-2527710cutting 1/2” foam sheet into 1” circles. Start point and end point don’t quite meet up. Can I make laser go slightly past the start point so it cuts complete circle and cut pieces will cleanly fall out of scrap sheet.
2023-10-2527910Hi all…I found objects that I like but it’s very intensive for laser.Does LightBurn have option to simplify objects? Check image so you can see what I mean.
2023-10-2423310So, as I progress down the road to the completion of the Russ Sadler upgrade, I’ve bumped into a few challenges* along the way. When I installed the adjustable head bracket (from Cloudray) I had to move it about 8mm forward so that it wouldn’t slam into the homing sensor (which was on the left side of the X gantry). I have moved that se...
2023-10-2424710On my Atezr L2 with movable Z axis I am trying to make the laser head drop down .5mm per pass, is this the correct setting? or should I go to .75 or even a full mm?Here is how I have it set now:
2023-10-2424310Is it possible with Lightburn to move the laser to last position with a command and not the mouse curser?
2023-10-2324610So I want the yellow to fill, but the red lettering to just be line a with no fill. How is this achievable if it even is?
2023-10-2321510Industrial chillers are a type of refrigeration equipment that compresses refrigerant to reduce the temperature of water and provide the necessary cooling water for industrial production. After a period of use, industrial chillers may have air in their refrigeration system due to corrosion of internal components, decomposition of lubricating oil an...
2023-10-2024310Recently, Bystronic of Switzerland released its financial report for the third quarter of 2023. The financial report shows that in the first three quarters of this fiscal year, due to the liquidation of backlog orders, Swiss Super 100's sales increased by 2.1% at a fixed exchange rate. However, due to the strong performance of the Swiss franc, espe...
2023-10-2022110I just received a new Atomstack A 40 Pro. I have contacted Atomstack with this problem but I get no response. Maybe someone on here can help. It is supposed to achieve 30,000 mm/min but I can only get it to move at about 6000 mm/min. the baud rate is set at 115,200. Should it be set at a different rate? If baud rate is not the problem, what do I do...
2023-10-2026110When going to help to search for info and I click a returned result, the menus at the stop responding. You can click through all menus and they highlight but they no longer respond by opening the menu items that are normally displayed. Clicking application name, Lightburn, at the top of the screen also doesn’t respond. If I go back to search ...
2023-10-2022610Hi everyone!Please help with RDC6563FG controllerHeught senson has no effect in HMI panel, if i chorted nozzle to earth, i dont see the alarm in controllerI bought a new one aplifier, and this sensor dont worked tooAnd axis Z has not moving any way, i checked up to PIN8(DA) in Z axis motor interface, and i have only 0v in this pin. Any ideas how a ...
2023-10-1934310
- Nessun Dato
Italiano
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski