chanelink logo
CHANELINK
Français

Farnell provides its own branded 3D printing consumables

690
2024-06-03 14:56:52
Voir la traduction

Farnell stated that it will store a series of 3D printed filaments under its Multicomp Pro brand, targeting "design engineers, creators, and hobbyists.".

"With the growing interest and demand for 3D printing, we are pleased to provide our customers with a diverse range of 3D printer consumables aimed at meeting the quality standards required by engineers," added Steve Jagger Marsh, the company's product manager.
These materials are:

PLA (polylactic acid) is a plant-based polymer that is easy to print and rigid. Suitable for objects below 50 °, suitable for prototypes.
ABS， A polymer that is more resilient than PLA and can withstand higher temperatures than PLA. Applicable to finished products, but please refer to the ASA for outdoor applications.

TPU (Thermoplastic Polyurethane, TPE) is a flexible rubber like wear-resistant plastic (in this case, the Shore hardness is 95A) that can be used for impact absorption, soft tactile surfaces, seals, bushings, and shock absorbers.

PVA， A water-soluble material that can be used as a washing stand for printing objects printed with other materials.
PETG， Almost as easy to print as PLA, and almost as resistant to impact and heat as ABS. Used for finished products and sturdy prototypes.
PA (polyamide/nylon), semi flexible, very tough and durable, suitable for bearings, structural components, and connectors.
HIPS (High Impact Polystyrene) is limonene soluble, used to support ABS and print lightweight objects.
TPE (Thermoplastic Elastomer) is more elastic than the aforementioned TPU (Shore Hardness 83A), highly durable and fatigue resistant, with a working temperature range of -30 to 140 ° C.
ASA， It is a UV resistant alternative to ABS, with almost impact resistance and heat resistance. Suitable for outdoor applications, with a low odor when printing.

Source: Laser Net

Recommandations associées

  • Combined spectral lasers can unlock the potential of laser plasma accelerators

    A team of researchers in Berkeley Lab's Accelerator Technology and Applied Physics (ATAP) division has developed a new technique that combines fiber lasers of different wavelengths to generate ultra-short laser pulses. The research is in the journal Optics Letters.This work could advance the development of laser plasma accelerators (LPA), which have the potential to push the frontiers of high-en...

    2023-08-04
    Voir la traduction

  • Fujitsu collaborates to research and develop multi band wavelength fiber optic transmission technology

    Recently, Fujitsu and KDDI research company have successfully developed a high-capacity multi band wavelength multiplexing transmission technology using installed optical fibers.The new technology of the two companies can transmit wavelengths beyond the C-band by using batch wavelength conversion and multi band amplification technology.Expanding transmission capacity in remote areasTwo companies h...

    2023-12-05
    Voir la traduction

  • X photon 3D nanolithography

    Virtual and Physical Prototypes: X-ray laser direct writing 3D nanolithography.Multi-photon polymerization (MPP), also known as 3D nanoprinting, has been investigated using wavelength-tunable femtosecond lasers. At a fixed pulse width of 100 fs, any spectral color in the range of 500nm to 1200nm can be used, which reveals the interaction of more subtle photophysical mechanisms than two-photon phot...

    2023-09-11
    Voir la traduction

  • Shanghai Optical and Mechanical Institute has made progress in ultra-low threshold Rydberg state single mode polariton lasers based on symmetric engineering

    Recently, the research team of Dong Hongxing and Zhang Long from the Research Center of Infrared Optical Materials of the Chinese Academy of Sciences Shanghai Institute of Optics and Precision Mechanics, in cooperation with Huazhong University of Science and Technology, reported a new mechanism for generating dynamically tunable single-mode lasers from exciton polaritons with ultra-low thresholds,...

    2023-10-12
    Voir la traduction

  • IPG Q1 revenue of $252 million, co-founder and new CEO of Jiaobang

    Recently, IPG Photonics, a high-performance fiber laser supplier in the United States, released its first quarter financial report as of March 31, 2024.The financial report shows that IPG Photonics revenue in the first quarter was 252 million US dollars, a year-on-year decrease of 27%; The net profit was 19 million US dollars, a year-on-year decrease of 75%. The change in foreign exchange rate res...

    2024-05-07
    Voir la traduction